Our Community is over 1 Million Strong. Join Us.

Stop Feeding Overpriced Junk to Your Dogs!

GET HEALTHY AFFORDABLE DOG FOOD
DEVELOPED BY THE AUTOMOTIVEFORUMS.COM FOUNDER & THE TOP AMERICAN BULLDOG BREEDER IN THE WORLD THROUGH DECADES OF EXPERIENCE. WE KNOW DOGS.
CONSUMED BY HUNDREDS OF GRAND FUTURE AMERICAN BULLDOGS FOR YEARS.
NOW AVAILABLE TO THE GENERAL PUBLIC FOR THE FIRST TIME
PROPER NUTRITION FOR ALL BREEDS & AGES
TRY GRAND FUTURE AIR DRIED BEEF DOG FOOD

heater selector and cooling fan Problems


Super-Slow
08-29-2005, 09:25 PM
the fan speed selector works. My cold/hot lever works. But my vent selctor and a/c does not work. Do I need to buy a whole new part or is the a chip located somewere likt the toyota have?

I have another problem too. My cooling fan will not kick on. I have tested the fan itself and it works. Is it conected to the same sensor temp sensor as my temp guage? I pulled the relay from my other cavalier and tried that, and no change.

Yes I like cavaliers. I have a 88 and a 92, I did have a 90. I gave the 90 to my sister who thrashed it. I prefere the cav over hondas do to its fuel economy is better and less cav are stolen than hondas.

Classicrocjunkie
08-30-2005, 12:47 AM
check the vaccum line behind your HVAC head, and see if that came undone.

Jonn
08-31-2005, 07:07 AM
They didnt work on my 89 when i got it either, found on the back side of the dash control, where the hoses gather into a round rubber piece, it had came loose due to one of those barbed washers that are perssed on coming loose and allowing a vac leak, pressed washer back on, put some epoxy behind the washer and no more problem

Add your comment to this topic!