Front wheel alignment.
Jason C.
08-29-2005, 05:10 AM
Hi, everyone. I replaced a new tein suspensions that the front right tire was wear inside. wondering the alignment had a problem. anyone suggest a idea front wheel alignment (toe-in?toe-out) for the standard setting of my 90' SW20 N/A. - 215/40/17F & 235/40/17R. Tks.
bob stone
08-29-2005, 01:11 PM
i belive all mr2 89 and above wear on the insides of the tire wayyyy quicker then the out side, however dont quote me on this, i could very well be wrong, any one else on forum back me on this ??
ac427cpe
08-29-2005, 02:13 PM
if you have too much camber or toe out your tires will wear quicker on the inside.
i have 0 toe in the back, 1/16 toe out in the front, and 2 degrees camber in the front, 1 degree in the back.
my setup might be a bit agressive for the street though.
i have 0 toe in the back, 1/16 toe out in the front, and 2 degrees camber in the front, 1 degree in the back.
my setup might be a bit agressive for the street though.
Jason C.
08-29-2005, 09:41 PM
Thanks for your advices, I should reset little bit toe-in from both front wheels.
Automotive Network, Inc., Copyright ©2026
