Help with Alarm install.

I will try to make this simple.

My 94 cx has a factory alarm installed.

I am ADDing one of those pager systems that connects to the existing alarm system (see it here http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=1342434136).


K, there are 2 ways to set it up. Stand alone or connected to the existing alarm (wait i already said that..).

I tapped all the wires from the existing alarm for the door sensore, trunk, etc etc.

The problem..
The one wire i cannont find is the wire (from the existing alarm) that grounds when the alarm is disarmed. So pretty much when i disarm the factory alarm, the new pager add on alarm also disarms.

I tapped into the black and white wire, however that is the relay wire, it turns on and off, thats it.

Any help at all would be cool.

Thanks.

Still need help, anything would be cool :smoka:

Get another relay and hook it up to the ground wire for the alarm