motor swap

i was wondering if anyone Knows if a 4.3 liter motor and trans from a 1988 blazer would fit easily into a 1987 blazer with the 2.8 liter motor.
Both automatic. will the motor mounts be the same?

also i have 4.3l motor and the trans from an 1989 s-10 would this work better?

any help is appreciated!!!

Whats the tranny in the 2.8?Is it the 700r4?The 2.8 mounts bolt in the 4.3 spot but if you are going with 4.3 get those mounts.Should just go V8 if its that time

No, it will require a lot of owrk for it to fit.

Pretty well different everything.

Yeh i was thinking that plus all the wiring ecm radiator

You could just goto i think a 3.4

Look at this link here i found
http://forums.s-series.org/viewtopic.php?t=33171&sid=72fbe1907e6f78e939cba2edaf54443d


http://s-series.org/modules.php?op=modload&name=Sections&file=index&req=viewarticle&artid=25&page=1



there is alot of articles advice from goin 2.8 to 3.4
2.8 to 4.3 read and do a google search also check out
http://www.s10forum.com/forum/forumdisplay.php?f=106

if you havent already

a 3.4 is an easyer swap (six cyl camaros) if your goign to go with the 4.3 the money you will spend swapping will be about the same as a 350 swap