Wiring Glow Gauges NEED HELP

Hey i just got some glow gauges off of ebay for the ac panel and my dash for my 97 talon. it says to hook them up to the power source that is wired to the ac panel/dash gauges. when i took everything apart i couldnt find the correct wires. please help me find them

There should be some wires plugged into your factory gauge pannel. Take them off and hook them up to your new one.

Or just find any red (+) wire (make sure you test it first), and then just ground to the chasis. Even quicker, wire to cig lighter.

Or just find any red (+) wire (make sure you test it first), and then just ground to the chasis. Even quicker, wire to cig lighter.


would the gauges light up when i turn on my driving lights using the cig lighter???

Anytime the car/electrical is on, the gauges will turn on.

I've got mine wired to the light control switch. So if you turn on the lights, it turns on the gauegs. People also wire it to the dimmer switch. So it;s only on when the lights are on, and adjustable then too

would the gauges light up when i turn on my driving lights using the cig lighter???


yeah i just got back from wiring the ac gauges and it works great. the best part is that my cig lighter light was burnt out so i just used the wires from the light to power it. one more q....what do u think the easiest way to wire up the dash gauges would b? since i have the cig lighter full

Good job. You can add those to the cig too. It takes alot to overload the fuse. I got all my inside neons hooked up to it, and used to have my underbodies too, until I decided to rewire the whole car. Took some load off. Still have my pillar pod hooked up with the inside lights up. Dont worry about overloading it.