Gonna Start Partin

OK, I've had it. I have this CRX sitting, can't really drive 3 cars with only two of us, and can't seem to sell it. So I'm parting. Here's the list... I really want to get $$ on the motor before I start picking the car for little parts, but we'll see what goes down. I can take pics of whatever you want. I'll do my best to post them up here.

1990 CRX DX shell. I'll sell the whole car, which runs fine, for $2000. I prefer to sell the motor and engine together. I will ship but you pay shipping. Here goes:
1994 D16Z6 motor, all stock w/black powdercoated valve cover
D16A6 distributor
JDM ZC trans W/LSD!! (includes intermediate shaft and axles, although one of the axle boots is torn.)
Centerforce stage II clutch
DC header
Konig short ram intake
Full dpfi to mpfi converted harness with resistor box and pm6 ecu
Progress springs with KYB GR-2 shocks
Rear lower strut bar
front upper strut bar
Tenzo axle back exhaust (same one LadyNRedSi used to have)
Si Seats (Black and gray, no red, typical bolster tearing but not bad)
Si cluster
Grant GT steering wheel and adapter ring
Sony CD player
Alpine Type S speakers
good door panels
all glass/hatch
good hood, bumpers
front fenders are jacked up
all lights are good w/working bulbs
D16Y5 (same as D16Y8) Intake manifold complete
Extra vtec solenoid
complete D16Y5 motor w/good bottom end and head
whatever other parts you want I probably have. The only thing missing is the rear interior behind the cargo box. I am keeping the wheels and tires, sorry.

Is there any interest here?

will you sell the resistor box by itself? if so how much shipped to 27610? if not, how much for the full DPFI->MPFI harness, resistor box, and ecu?

edit: where are you located? im also interested in the bumper and hood.

DC header $?
Konig short ram intake $?
Progress springs with KYB GR-2 shocks $?

Let me know the prices for these items, so we can work something out ThanX!!

how much for the lsd tranny?

how much for d16z6

I need the front bumper lights and front corner turn signals. If you have them what is your asking price for both sets. I'm in Dallas tx.

Si cluster? shipped to 88201 email [email protected]

If you still have the extra vtec solenoid and it has the green pressure switch I will take it. Give me a price please.

how much for the shell. and again, where do you live?

How much for the cluth and the steering wheel?

How much for the center console and everything included? (IE: center console frame, heater/ac control panel, cigarette lighter....considering you have these items) And also shipping cost to 97603. I'm missing these items in my CRX and would like them. PM me or email to [email protected] - Let me know, Thanks!

Sorry for slackin, i've been busy... here are some prices, all prices are plus shipping unless specified, I'm in Louisville, KY:

Harness, resistor, ECU together for $150
Bumper and hood, $100, has Si lower lip on bumper and fog lights
DC Header for $100
Konig short ram $20
Springs/shocks $200
LSD trans for $750, you get intermediate shaft, axles, Centerforce clutch together (takes an EG clutch, so I'm just making it a kit)
D16Z6 $500
Front corners: $50, one of the bumper lights is broken, but if you guy the corners i'll give you the god bumper light
Si Cluster: $50 shipped to you
Extra VTEC solenoid is gone
Shell will go for $300 plus whatever you want left in/on it (i.e. suspension, seats, etc.)
Steering wheel/adapter, $50
For the whole center console w/heater/lighter/armrest, I'd say $100 and we'll have to figure out shipping once I get it out and weigh it all.

If you want to discuss further, pm me or hit me up on AIM, my SN is wiredspeedjosh, or email [email protected]. Thanks!!

bump... you guys still there?

sorry, everyone, the car was bought tonight. good luck with finding your parts!

500 for a z6 is kinda steep...