Gonna Start Partin
4GZChatch
08-22-2005, 01:07 AM
OK, I've had it. I have this CRX sitting, can't really drive 3 cars with only two of us, and can't seem to sell it. So I'm parting. Here's the list... I really want to get $$ on the motor before I start picking the car for little parts, but we'll see what goes down. I can take pics of whatever you want. I'll do my best to post them up here.
1990 CRX DX shell. I'll sell the whole car, which runs fine, for $2000. I prefer to sell the motor and engine together. I will ship but you pay shipping. Here goes:
1994 D16Z6 motor, all stock w/black powdercoated valve cover
D16A6 distributor
JDM ZC trans W/LSD!! (includes intermediate shaft and axles, although one of the axle boots is torn.)
Centerforce stage II clutch
DC header
Konig short ram intake
Full dpfi to mpfi converted harness with resistor box and pm6 ecu
Progress springs with KYB GR-2 shocks
Rear lower strut bar
front upper strut bar
Tenzo axle back exhaust (same one LadyNRedSi used to have)
Si Seats (Black and gray, no red, typical bolster tearing but not bad)
Si cluster
Grant GT steering wheel and adapter ring
Sony CD player
Alpine Type S speakers
good door panels
all glass/hatch
good hood, bumpers
front fenders are jacked up
all lights are good w/working bulbs
D16Y5 (same as D16Y8) Intake manifold complete
Extra vtec solenoid
complete D16Y5 motor w/good bottom end and head
whatever other parts you want I probably have. The only thing missing is the rear interior behind the cargo box. I am keeping the wheels and tires, sorry.
Is there any interest here?
1990 CRX DX shell. I'll sell the whole car, which runs fine, for $2000. I prefer to sell the motor and engine together. I will ship but you pay shipping. Here goes:
1994 D16Z6 motor, all stock w/black powdercoated valve cover
D16A6 distributor
JDM ZC trans W/LSD!! (includes intermediate shaft and axles, although one of the axle boots is torn.)
Centerforce stage II clutch
DC header
Konig short ram intake
Full dpfi to mpfi converted harness with resistor box and pm6 ecu
Progress springs with KYB GR-2 shocks
Rear lower strut bar
front upper strut bar
Tenzo axle back exhaust (same one LadyNRedSi used to have)
Si Seats (Black and gray, no red, typical bolster tearing but not bad)
Si cluster
Grant GT steering wheel and adapter ring
Sony CD player
Alpine Type S speakers
good door panels
all glass/hatch
good hood, bumpers
front fenders are jacked up
all lights are good w/working bulbs
D16Y5 (same as D16Y8) Intake manifold complete
Extra vtec solenoid
complete D16Y5 motor w/good bottom end and head
whatever other parts you want I probably have. The only thing missing is the rear interior behind the cargo box. I am keeping the wheels and tires, sorry.
Is there any interest here?
rossi38special
08-23-2005, 05:36 AM
uhhhhhhm LOCATION????? close to nm hopefully
4GZChatch
08-23-2005, 08:12 AM
Sorry, Louisville, Kentucky. Forgot to add that... I will ship if you pay shipping costs.
jimmym86
08-24-2005, 03:57 PM
How many miles you got on your engine?
4GZChatch
08-25-2005, 12:04 AM
it was pulled at 89K, and has had about 15K on top of that, so just over 100K total. New timing belt, water pump, oil pan gasket, valve cover gasket, etc... oil changed religiously... pm me and I'll give you my phone number if you're interested.
georgia_boy1185
08-26-2005, 05:35 AM
wondering if you will sell the tranny seperate? how much? as long as its in good working condition
Automotive Network, Inc., Copyright ©2026