Emblem removal

Getting the ride painted soon, wanted to shave all the emblems. Whats the best way to remove them? I only need to know how to remove the ones on the back, especially the Si emblem...

razor blade. just dont cut the car. once you get a corner off you can just pull it. then remove any excess glue and crap with the blade...make sure its a good one. nice and sharp.

yep about right and snce your getting it painted you dont ahve to worry about the paint lol

I used a puddy knife and goo be gone. Just make sure you wash the goo be gone off with rubing alcohol and water.

I used a sharpened popsicle stick. It worked pretty good, but my paint was really faded so I've decided that I'm going to paint it anyway. The "HONDA" Emblem and the "Si" emblem are just stuck on. THe actual "H" has a hole behind it that will need to be filled in. Find someone with a welder to fill it in, bondo will only last about 4 years at the very best.

heh..good story.


mmm..popsicles...:licker:

i think i just used a flathead to get my 'H' off and then hit the holes with a ball peen hammer and filled them with fiberglass.. smooth like a glove.:smoka: