Please you guy HELP, I cant drive my car until I fix this !!

first of all my english is really bad , so please try to understand me as much as you can .

I change my brake and roto today ( gs 97 5 speed ) I change the driver side brake pad and roto , but when I try to do the passenger side , I take out the brake pad , and try to take out the roto ( you guy already know before you take out the roto , there and 2 bolt top and bottom , I did take out the top bolt , but the bottom bolt I cant take it out , I try many thing and I accident TRIP the **** out of it , Now I cant take that bolt out, and Im to scrare to driver the car , now my car is park in my new house ( my parent just bought 250K for the house 2 day ago, and we will moving this sunday ) and my dad really piss off , because it brand new house and I already make the garga dirty ), I try to fix this problem , so i can take the car out off the house soon as possible . Can any one know how to take that strip bold out . Im really tire now , I spend over 7 hours to take that bolt out, Please help. thanks again please try to understand my english , thanks

Shitty man try one of them gator grip things (they sell them at sears for sure maby you can find one at wal-mart or something) I used it once when i had a stripped bolt work pretty well. Or try some vise grips. GO TO A PARTS STORE AND GET A NEW BOLT FOR IT do not reuse it!

GOOD LUCK

wow u not sleep yet ? my friend and me just went to walmart 20min ago, we see that gato rip thing ( I think it 10 buck ), But the side of the socket is too small for wrench. By the way wat is vise grips , where do I buy it ?. thanks

They are a locking type wrench with teeth Wal-mart or any hardware store will cary them.

Side of socket do you mean where it goes on to the ratchet?

yes, I will try to use vice grip tomorrow , hope it work , thanks for answer my question , I gotta sleep , my hand is really hurt and and tire , I will post here again tomorrow , later and good night. ( GET SOME SLEEP MAN ) ^_^.

LOL good luck! I hope that works for you! MAKE SURE you get a new bolt for that thing!

If you cannot get a grip on the bolt with the vice grips, you can try a back out kit. It is a set of drill bits but designed to back screw and bolts out of the hole using a drill.
It is a real handy tool. Good luck bud!! :grinyes:

John

Sears also sells a set of stripped socket sets designed to take out stripped sockets. I work there but Ive never used the things.

Yea that is the gator grip i was talking about.

Sears also sells a set of stripped socket sets designed to take out stripped sockets. I work there but Ive never used the things.

Gator Grip is a socket that has metal pins inside that conform the the stripped bolts. They're good for under 50lb Tourqe. I think they have a ft/lb rating on the box.

Stripped socket sets are have swirls in the thread that makes the bolt slide into place. I've almost bought a set a few times. They come in a sets. I think their only $19.99. You can goto Harbor Freight and get a set for like $5. I have to admit, I do buy alot of crap from Harbor Freight. its the supper walmart of tools. you can search their website or even see if sears-ebay has a set on auction.

Hell yea Harbor Freight is the shit! I got my engine stand there for under 50 bucks!

Those little pieces that sears sells to get the stripped bolts out DOES NOT WORK!! I bought a set when I was doing my exhaust. The bolts on the heatshield on the manifold were stripped. I bought them, and needless to say, the heat shield came out with the manifold. Would have been easier without it. Waste of $20. I bought with a giftcard (plus a torque wrench), so it wasnt my money! Yeah me

Hey guy im back . YES finally get that F***ing STRIP bolt out. Today I try many thing , even my dad was helping me take that bolt out ( he still piss because I trash his garga , brand new home , tomorrow we will moving in ). But any way after many hours we cant take it out , my dad had to go back to the shop ( he the owner of nails shop ), he say just take it to mechanic shop let them take it out and send me the bill. It was 3:00 pm and saturday , who gonna open that time , but lucky I found a shop that still open , I went in there and one of my old friend come out and help me take that bolt out , he charge me 10 buck but I gave him 15, after that I went home and put the other brake on ( I ride that car with the driver side brake done ,and the passenger side is still not done , that my I saw some smoke coming out of my passenger side brake , I went home and done the other side , now my car running really smooth , no more squezing , but one thing I still scare is , if I go high speed , then brake , then I stop I saw very little little smoke , is this normal ?. ( DAM LONG STORY , THANKS FOR HELPING ME AND READING THIS , REMEMBER MY ENGLISH IS BAD , SO PLEASE UNDERSTAND , THANKS ).

lol. Understood. If you English was your first language I would have said somthing, but it's not, so I'll let it slide (every time).

Glad to see you got everthing fixed. No better feeling then that. Where are you from?

the smoke after a stop from high speed the first couple times (3-4 times) is pretty normal. The rotors are coated usually in a oil used when processing them. That is that burning off.

Good to hear you got it off!

Smoke is normal like nova said

guy one more last question before I go to sleep , you know 2 LONG bolt that tight to the calibor , the one on the top had the black rubber, When I took it off , I dont see the rubber , then after I done with the brake job , warm up the car , take it for a ride , come back clean the my gagra , I found the black rubber , under the dirty payper tower, is it ok to ride the car like that , or I had to take out that long top bolt and put the rubber back ?.

PUT THE RUBBER BACK! I just got done working on my friends car who's previous owner put ripped rubber things back on. The caliper mounting bolts were STUCK.

Thanks