A/C compressors for intrep

my compressor bearings failed on my 94 Intrepid so I would like to get a used one from the yard but, what other dodge/chryslers compressors will fit the 94 intrepid?

thanks

'93-97 Intrepid, Chrysler Concorde, or Chrysler LHS, depending on the engine. It varies between engines, either the 3.3 or 3.5.

the 3.5 and 3.3 have the same compressor. at least the 97 concorde one i got worked in my 96 intrepid fine.

You CAN purchase the bearing for the compressor and rebuild it yourself. I have done many of them in the past. The compressors are so simple, its really dumb to buy a new or remanufactured compressor from an autoparts store.

Most fail due to the following:
Front shaft seal leaks: Replacement around $9
Leaking "O" ring: around $8
Bad Internal bearings: approx $26
Bad Clutch Bearing: approx $45

Most parts I purchse locally but there are several bearing suppliers online, also John Deere equipment also use the same compressor.

Here are a few sites:

http://www.polarbearinc.com/PBPC/homepage/Search/GA/Seals_GA_Metal.html

!! Seals and such:
http://www.apairinc.com/iVIEW.asp?CAT=Compressor%20Seal%20Kits&SCAT=Nippondenso

http://www.apairinc.com/main.asp
(there main page)

Bearings:
http://bearingsdirect.com/products/

Condensor Lookup:
http://webbase.transpro.com/coolcat/

TSB's & Recalls:
http://www.alldata.com/recall/make/

I hope this helps at least ONE person out there, because I have learned alot from reading the forums.
Dave