Citroen Xsara WRC

Here's a quick pic of my latest project, Airfix's Citroen Xsara WRC. The body has had all of the intakes and vents opened and will have mesh from the Studio 27 upgrade kit covering them, also I have decided to not use the decals for the door pillars fading the white through yellow to red but airbrushing the fading instead resulting in a much finer fade.

Steve

Did you miss some yellow on the b-pillar or is it suppose to be like that?
Now I wish I have an airbrush. Very nice body work:)

Man, you're on fire! :D Keep it up!

And if you get a minute, how about a shot of your display case? :D

Nice to see you made a start on it. (finally, seeing how you've had yours longer than I've had mine) :p

I must admit that I was thinking of doing the same on the pillars with my airbrush. The fade on the decals is a bit "toy" and coarse!

Err, did you accidentally knock off those badly moulded wipers, or are there a nice pair of PE ones included in the Studio27 Kit??? :rolleyes:

Lookin' Good!

Regards
Mark

Another top job on its way

:) :) :) :)

Yeah....lets see that display cabnet :)

The pillar that has no yellow on it will, eventually be painted black so no point fading that one.

As soon as the builders have finished building our conservatory and dust flying everywhere I'll take the masking tape that is sealing up the gaps in my display case off and take a few piccies.

Mark, I cut the wipers off because (a) they looked sh**e! and (b) there is a pair on the photo-etch upgrade set thankfully.

Steve

Finally finished and here are a couple of piccies of my Citroen Xsara WRC. The kit is the Airfix one with added extras, a photo-etch upgrade kit from Studio 27, Sakatsu metal aerial bases and belt buckles and harness'. The only major problem I had was with the window, it's moulded in one piece and although the front and rear screens fit well the side windows all had rather large gaps around some edges, in the end I just used the front and rear originals and replaced the side windows with clear sheet.

Hope you like it,

Steve

http://files.automotiveforums.com/uploads/367462Picture_0746.jpg

http://files.automotiveforums.com/uploads/290579Picture_0744.jpg

:eek2:

<--- is stunned once again!

WOW !!!!!!!!!:eek:


I want to make one like that !! :eek2:

:eek: wow, looking awesome.

Looks totally real, I can't even tell that it's clear sheet :)

Fantastic job, mine is still in the cuboard waiting to be built. How was the S27 detail set? I very nearly purchased the Renaissance one at a recent show but decided against it as i thought i would be unlikely to work on it soon. Ive noticed the same problem with the windows - f**king Airfix - but u have tackled that problem very well, i will bare it in mind.

Ok. Now I want to start mine :rolleyes:

Can't believe how good you made such a FUGLY kit turn out.

Another fine example of your craftsmanship, sir!

(Not tried fitting the windows yet. Are they really *that* bad?)

I'm not going to try opening mine again until I get the PE kit. Those damned wipers are way out of proportion.

Why is the plastic *soooo* thick?

(I bet the fenders on the 1:1 aren't even *THAT* thick!!!)

...I like what you did on the pillars. I'm definately going to do the same with mine. (I had the same idea before I saw yours, but seeing it done made me more confident).

I just can't muster the enthusiasm to continue my Supra at the moment, and I'm gettting a *severe* backlog of kits!!!


Regards
Mark

This model is incredible !
very nice looking. :)
I was hesitating to buy the kit, and now, I know what will be the next kit I will buy at my model shop !!!!! :p

Congratulations,

Steve

Good job Steve. :eek:
I also have buy this Airfix model and it was really disappointing
to see the poor quality of the model (the wipers are really pathetic) :mad:
For sure I will not have the opportunity to find the Studio 27 upgrade kit here in Portugal, but at least I know that is possible (with some extra work) to make this model fit well between the other WRC's from Tamiya.

Thanks for the comments chaps, much appreciated,

Chris, the Studio 27 p-e set was a well worth while buy even though I didn't use some of the parts, brakes discs and calipers, badges and especially the window wipers are 100% better than the originals, there is also and pattern included and parts to make the inner door panels.

Steve

Steve,

can i ask you a question :
what a strange location for the rear car plate id ?
on all real xsara wrc pics i have, i have never saw it put like you. do.




Originally posted by Steve Gibbins
Thanks for the comments chaps, much appreciated,

Chris, the Studio 27 p-e set was a well worth while buy even though I didn't use some of the parts, brakes discs and calipers, badges and especially the window wipers are 100% better than the originals, there is also and pattern included and parts to make the inner door panels.

Steve

Nice work Steve. Very tidy indeed

Nice job on the xsara mate!
Either you have the patience of a saint or airfix kits are better than they used to be! last time i built an airfix kit was over 15 years ago and i remember them being really shite and about the same time i discovered tamiya and never did an airfix again!
Was the S-27 kit expensive? and where did you get it from?