how to remove tail light assembies (sp)

Hey everyone, i have a 98 rodeo and i cant seem to get the lowest most screw out... i cant find a screw driver that skinny.. anyone have any tips? I am putting in a hidden hitch brake light plug and i need to get in there to do it. Thanks

The FAQ site has been down the couple of days.



Rodeo/Amigo: There are 2 screws on the side and one under (between light and bumper) Light should then pull out to where you

can unplug your connection

The FAQ site has been down the couple of days.



Rodeo/Amigo: There are 2 screws on the side and one under (between light and bumper) Light should then pull out to where you

can unplug your connection



Do i need a really skinny screw driver to get the lowest screw? and thanks ryan. BTW why is the site down? Thanks

I just wedged what I had in there, when you have the other two screws out it should give you enough "give" to get that last one out.

I just wedged what I had in there, when you have the other two screws out it should give you enough "give" to get that last one out.

Nice it worked thanks. I am having trouble getting the hidden hitch part to work though, maybe its the trailer plug i will try another one tomorrow.

Not sure what you are having problems with, but if you explain maybe we can help, I have a hidden hitch installed on mine as well using the T connector it sounds like you are using the same.