in desperate need of an obd0 b16 distributor

i've been getting dicked around in pursuit of an obd0 distributor for the b16a swap i did in my rex... does anyone have one for sale or else know where i can find one fast???

there are forsale on ebay by distributer king let me get the link they cost 212 dollars http://cgi.ebay.com/ebaymotors/NEW-88-91-Honda-Civic-JDM-B16A-Ignition-Distributor_W0QQcmdZViewItemQQcategoryZ33690QQitem Z7990412479QQrdZ1

you can use any OBD0 MPFI distributor, but you'll have to cut the front leg off to clear the VTEC solenoid.

just a heads up if you're the kind who'd rather not pay $212 for something you can get for a 1/4 of the price. (and btw, no problems with leaking)

I have one but you dont want it, the bearing is no good :mad:
Hence the resone why I bought a new (used) one. It's hella hard to find a used one, might take you awhile but it can be done.

If your in a hurry I'd go for the new one off eBay, that looks like a nice one, and you dont have to worry about it going bad, because it's NEW!!

you can use any OBD0 MPFI distributor, but you'll have to cut the front leg off to clear the VTEC solenoid.

just a heads up if you're the kind who'd rather not pay $212 for something you can get for a 1/4 of the price. (and btw, no problems with leaking)

Is this really true? Why don't people just use a B18 dizzy? Do they have to modify them to clear the solenoid too?

hmotorsonline.com has it in their used parts section: http://www.hmotorsonline.com/shop/sc2000search.cgi?what=page&item=40006

Is this really true? Why don't people just use a B18 dizzy? Do they have to modify them to clear the solenoid too?

all civic/integra distributors of the same OBD generation are identical on the inside, the only difference is the mounting points (legs). B18A distributor will need to be modified as well.