Clarion HU installation...

I am really confuse with this thing, here is a picture with my questions on it, would somebody please help me.

http://img316.imageshack.us/img316/3782/picture23tk.th.jpg (http://img316.imageshack.us/my.php?image=picture23tk.jpg)

Also how should I connect the speakers? Get the wire through a loop on the connector and then solder?

Thank you.

the phone wire .... no need to connect unless you have a clarion car phone to connect it to

yellow wire #1 .... find a wire that is constant 12V

yellow wire #2 .... I am guessing it's for the internal amp, if you are gonna use the built-in amps - you need to connect it straight to the battery like you would any other power amp (remember to fuse the wire close to the battery)

the black wire ..... is a ground, so yea just connect it to any bolt in the cavity that goes to metal.

Ok, going through Clarion FAQ I found out that Bus Connector is power for CeNet Controll, so I am guessing it is not needed for the HU to work.
Am I right?

Alright I connected the HU without connecting the Bus Power Wire (3A fuse) and it works perfectly, thanks for your help.