what mods have u done??

what mods you've done to your primera and what power gains you've gotten after them?

mines all dressup mods...like tein NA's, 17x7 wheels, tires, fog lamp (mine's a luxury trim)....what else did I get? hummmm... well, I didn't spend any more than $2600, that's for sure. it's lookin gooooooooooooooooood!!! :D :D :D oh yah, added a drop in K&N air filter.

Originally posted by Vi - X - s0
what mods you've done to your primera and what power gains you've gotten after them?

91 Black SE-R w/:
16x7 BBS RX, Yokohama A520 215/40-16, Swain White Lightning coated Hotshot header, Random Technology cat, Trust (GReddy) exhaust, AD22VF brakes, Axxis pads, SS lines, Tokicos, Eibach Prokits, ST sway bars, Courtesy front STB, Stillen short shifter, Naeyaert rear STB, Fiamm air horns, Factory cruise (not available in 91), DPR Stage VI head w/ HPC coated valves & DPR valve springs, Swain TBC & PM coated 300ZX pistons with domes removed, 1mm overbore, SR20DET piston coolers, complete balancing, CM aluminum flywheel, JWT Pressure Plate, Unorthodox Racing pulleys, 370cc injectors, JWT ECU, JWT cams, ES suspension bushings, ES steering rack bushings, prototype Nu Tech adjustable rear swaybar, Place Racing CAI. Momo Shadow shift knob (engine currently out of the car and being rebuilt - we can rebuild it, make it stronger, faster, better :-)

91 Red G20 w/:
Courtesy short shifter, Random Technology cat, 17x7.5 ADR M-Classic, Sumitomo HTR-Z II 205/40-17, Momo Shadow shift knob, Momo Shift Boot, Momo pedals, Momo Runner steering wheel with modifications to use factory cruise control, KYB ABX dampers, Ground Control coilovers (275/200), Bluebird SR20DET, Unorthodox Racing pulleys, JWT clutch and Pressure Plate, JWT aluminum flywheel, Swain Tech White Lightning coated exhaust manifold; turbine housing; exhaust elbow, Extrude Honed exhaust manifold; turbine housing; exhaust elbow, Stillen Intake, HS prototype DET installation kit with HKS intercooler - coated with Swain Tech Black Body Emitting coating (what intercooler?), ES shifter bushing

95 G20

Hotshot CAI
Espelir Springs
KYB AGB Adjustable Shocks/Struts
Strut Bar
Bendix Brake Pads
Smoke/Red Tail Lights

AZN VIRUS....You've got mail.

HotShot gen.4
Place Racing CAI
Greddy MX
G/C coilx
KYB AGX
TopSpeed carbon fiber STB
Tomei mild cams
Nology wires
16x7 Konig Rated R
205/40/16 Nitto Nt-450


the rest is interior...........

99 G20 t

Hotshot Gen4
JWT S3 cams
Place CAI - set up cold air w/ AEM bypass
K&N filter
8mm wires
custom piping to a APEXi N1 muffler

I'm just gettin started but here you go just for kicks. My first mod was going from AT to MT with NX2000 parts :)

NX2000 tranny (VLSD, better gear ratios)
Cool lookin shift knob, the boot from an NX2000 custom fitted to the console of my G20
Ractive pedals
Hyperwhite headlight bulbs

More to come.

18"Viper rims
Eibach springs/shocks
3" exhaust
Full Stillen body kit
sway bar
KN Filter
Eyelids
2pak paint

1995 Infiniti G20 5-spd

Performance:
Hotshot Cold Air Intake
Hotshot Header (Gen 3)
19* Advanced Timing
Unorthodox Racing Underdrive Pullies (2 set)
ACT Clutch
Lightened Stock Flywheel
Pacesetter Short Shifter
Ground Control Coil-overs (340/250 springs)
AGX struts/shocks
16" Konig Monsoons
Nitto 555ZR's 205/45/16
Energy Suspension shift bushing
Energy Suspension Motor mount inserts F/R (modded to fit)

Stereo:
Clarion DRX8575z deck
Infiniti Kappa 4x6 plates (fronts)
Infiniti Kappa 6.5s (rears)
Infiniti Kappa Perfect 12.1 12" sub
Rockford Fosgate 50.2 amp (i think)

As of right now:

141.1 hp @~6050rpms
133.4 ft.lbs @~4700rpms

http://groups.yahoo.com/group/Team-NISMO-AZ/files/Justin/dyno%20141.jpg