Programming instructions for 00 Jimmy remote

Hi.. I'm looking for programming instructions for a 2000 GMC Jimmy keyless remote.. Can anyone hlep??

Thank you

In order to progam you car to accept a new remotes do the following. I just had to do it.

get in car and close door

press and hold the door lock switch in the unlock position

while holding switch insert key into ignition and turn ON OFF ON OFF ( not to start. Car locks should cycle by itself.

your are know in program mode

take your first remote and hold down the lock and unlock buttons for 15 to 20 sec. until car locks/unlock.

Program the next remote now.

(You must do this to all remotes, when car enters program mode it clears all the codes from the previous remotes.)

You can do this for up to four remotes.

next turn the car back to the on position or start the car to cancel program mode.

Remotes should work.

Good luck

thanks for info . I got my keyless remote to work on my 2000 bravada