Change Oil light in 00 GT

how did I reset this bastard? I had the oil changed a few weeks ago and this light on my dash keeps coming on. I've tried pumping the gas 5 times prior to starting the engine with key turned to on position, but that doesn't work. it's annoying, please help.
thanks in advance

i thought it was press the gas 3 times within 5 seconds, and that method worked on my 99 GT. other than that, i have no idea how to.

how did I reset this bastard? I had the oil changed a few weeks ago and this light on my dash keeps coming on. I've tried pumping the gas 5 times prior to starting the engine with key turned to on position, but that doesn't work. it's annoying, please help.
thanks in advance

Change the MODE till it says OIL and just hold the reset for about 3 seconds and it should reset to 100.
.
.

how did I reset this bastard? I had the oil changed a few weeks ago and this light on my dash keeps coming on. I've tried pumping the gas 5 times prior to starting the engine with key turned to on position, but that doesn't work. it's annoying, please help.
thanks in advance

You push & release the accelerator pedal slowly 3 times within 5 seconds then the CHANGE OIL light should flash indicating its resetting.

If you have a GP with a Digital Information Center (DIC) the procedure is different.



http://i5.photobucket.com/albums/y186/lizzywiz/gtp.jpg
Thrasher CAI, DHP v1.0 PCM,
3.25 SC pulley, CAIT GMAF, Hi-Flow CAT,
u-bend delete, 160 TS, ZZP Stage 1 TB,
TB spacer, MSD 8.5mm wires, Autolite 104s,
Goodyear Gatorback Serp. & SC Belt,
Nitto NT555R Drag Radials

how did I reset this bastard? I had the oil changed a few weeks ago and this light on my dash keeps coming on. I've tried pumping the gas 5 times prior to starting the engine with key turned to on position, but that doesn't work. it's annoying, please help.
thanks in advance
There are literally dozens of posts in this forum on that subject. Do you have the optional trip computer (w/ MPG etc.) or the one that just shows bulbs and open doors and Trac on/off? Use the search function on "oil light" or something similar. It depends on which system you have. Both are covered.

Change the MODE till it says OIL and just hold the reset for about 3 seconds and it should reset to 100.
.
.

Sorry Wylie, didn't know you were responding to this. Normally I leave the easy ones for KustomKid54 - Jim....lol. :lol2:


http://i5.photobucket.com/albums/y186/lizzywiz/gtp.jpg
Thrasher CAI, DHP v1.0 PCM,
3.25 SC pulley, CAIT GMAF, Hi-Flow CAT,
u-bend delete, 160 TS, ZZP Stage 1 TB,
TB spacer, MSD 8.5mm wires, Autolite 104s,
Goodyear Gatorback Serp. & SC Belt,
Nitto NT555R Drag Radials

Sorry Wylie, didn't know you were responding to this. Normally I leave the easy ones for KustomKid54 - Jim....lol. :lol2:

Well I Didn't do much good did I?
I thought they all had DIC's.
.
.

Well I Didn't do much good did I?
I thought they all had DIC's.
.
.

You did good. If he had a DIC it would have answered his question. :bigthumb: Be cool. :cool:



http://i5.photobucket.com/albums/y186/lizzywiz/gtp.jpg
Thrasher CAI, DHP v1.0 PCM,
3.25 SC pulley, CAIT GMAF, Hi-Flow CAT,
u-bend delete, 160 TS, ZZP Stage 1 TB,
TB spacer, MSD 8.5mm wires, Autolite 104s,
Goodyear Gatorback Serp. & SC Belt,
Nitto NT555R Drag Radials

Be cool?
Thanx it went over 100 here today.
Two hours to Beer.
.
.

thanks guys. I'll try it again.
No DIC.

got it. it should have been worded differently.
pump the gas three times slowly within five seconds, start the ignition and THEN the light will blink meaning it is resetting.
thanks again guys