nooooooooooo help
jinjur
07-11-2005, 03:11 AM
RIGHT....
this bloody knocking............its driving me mad.
replaced rod big end bearings.....replaced crank main bearings.......set tappets.............
and
still
KNOCKING AT 2500 TO 3500 FREEEEEEAKING RPM on rev up.
about to junk this civ so please help me guys........
i can feel it through the pedals...even with the clutch in.
only a couple of guys have helped so far and their help was soooo much appreciated.
i know there is soo much experience out there that could help too.
please.
andy
belfast
this bloody knocking............its driving me mad.
replaced rod big end bearings.....replaced crank main bearings.......set tappets.............
and
still
KNOCKING AT 2500 TO 3500 FREEEEEEAKING RPM on rev up.
about to junk this civ so please help me guys........
i can feel it through the pedals...even with the clutch in.
only a couple of guys have helped so far and their help was soooo much appreciated.
i know there is soo much experience out there that could help too.
please.
andy
belfast
turtlecrxsi
07-11-2005, 08:46 AM
Does the car run good? motormount?
FuLL BLown STD
07-11-2005, 09:28 AM
it be better if we could hear the knock, but it definately sounds internal? like turtlecrxsi said could be a mount/loose exhaust/heatshield. could have valve tap from timing being way off. does it knock when its driving? or just at idle/both.. my variations are just to name a few. let us know dude.
dustin
dustin
Automotive Network, Inc., Copyright ©2025
