help with Torque pattern for valve body

I took the valve body out of my 97 Taurus with an AX4N transmission to replace the broken clip for the forward valve, the valve and the springs. The clip broke and caused the valve to get stuck with the springs compressed and prevented shifting into overdrive. Anyway I am ready to put the valve body back and would like to know what the torque valve and tightening pattern is for the screws that hold it on the transmission. If anyone can help that would be great.

Thanks

Jeff

http://img.photobucket.com/albums/v230/widlin1/ax4n%20transmission/allvalves.jpg

http://img.photobucket.com/albums/v230/widlin1/ax4n%20transmission/DirectValveClip.jpg

SHoz123 already posted you a diagram and procedure for this over at

www.taurucarclub.com

Mike
:smokin:

Thanks, Mike I just went there and printed Pauls instructions. Hopefully the weather will cooperate and I will have the car on the road this weekend.

Jeff