Our Community is 940,000 Strong. Join Us.


420a and srt-4 swap


Flambaosting
07-06-2005, 07:50 PM
forgive me if i sound crazy but i have heard that you can put the srt-4 motor in the 420a eclipses because the mounts are basically the same and would feet well. i heard it's in the works already. what do you all think?

drdisque
07-06-2005, 11:27 PM
the SRT4 motor is backwards compared to the 420A in the Eclipse.

Thor06
07-07-2005, 12:09 AM
Some of the older neons (95 to 99 I believe) had the 420a so yes a 95-99 Neon 420a could go into a 95-99 RS/GS or vice versa. The SRT4 engine is not the 420a so it could not be directly swapped.

Flambaosting
07-07-2005, 11:52 AM
if it gets done that would be a nice sleeper though wouldn't it?. and yeah it's backward but i heard something about altering the firewall to make way for the srt's turbo.

l_eclipse_l
07-07-2005, 01:48 PM
It would be nearly as hard as doing the 4g63 swap. You would still need a different transmission and ecu, among other things. Why not just buy a damn srt-4.

mopowerman
09-28-2009, 08:12 PM
the swap can be done the motor mounts don't line right up, but as for it being backwards my 420a in my 95 eclipse sits the same way as the srt4 in the neon. It would be backwards in a 97-99 when the engine was flipped around.

SilvrEclipse
09-28-2009, 08:42 PM
the swap can be done the motor mounts don't line right up, but as for it being backwards my 420a in my 95 eclipse sits the same way as the srt4 in the neon. It would be backwards in a 97-99 when the engine was flipped around.


This is not true. The engine was never flipped around. The 420a eclipse has the tranny on the driver side as does the srt4 motor. However it will take a lot of fabrication to make it work. There is a 2.4 swap for the 420a that bolts right in with the exception of a few pieces. This would be a far better swap than the srt4 motor.

mopowerman
09-29-2009, 09:12 AM
This is not true. The engine was never flipped around. The 420a eclipse has the tranny on the driver side as does the srt4 motor. However it will take a lot of fabrication to make it work. There is a 2.4 swap for the 420a that bolts right in with the exception of a few pieces. This would be a far better swap than the srt4 motor.

what i should have said was that some eclipse had the trans on the pass. side of the car not the 420a engine car that was my bad.
SAMSUNG-SGH-A867/A867UCHJ3 SHP/VPP/R5 NetFront/3.5 SMM-MMS/1.2.0 profile/MIDP-2.0 configuration/CLDC-1.1 UP.Link/6.3.1.20.06.3.1.20.0

david-b
09-29-2009, 10:23 AM
what i should have said was that some eclipse had the trans on the pass. side of the car not the 420a engine car that was my bad.

All models EXCEPT for the 420a had the motor sitting the other way.

Long story short, this thread is over 4 years old and the original posters and responders aren't even on here anymore. Point is, it's just cheaper in buying a SRT4 if you want one. Unless someone could show a writeup or something, you're on your own.

98spyderman
10-03-2009, 09:49 AM
ummm ya why would would u want to do a srt-4 swap in to a dsm? that makes no since. just build the gst motor and there you go. forget the srt-4

Add your comment to this topic!