H22A swap

Hey ran into a problem today with my h22 swap, where exactly am i suppose to mount the external coil of the h23a, ive already swapped the h23a dizzy but am unsure where but i just have no clue, also if anyone knows why u have to swap it jus be good info thanks

i used some shit L-shaped bracket, and mounted it to the rear corner of my head, just aft of the vtec solenoid and stuff - i'm not looking at my car now - but i believe it is around the aft camshaft "hump".... it has to be mounted somewhere close because the wire from the coil to the dizzy is short (: - i'm sure you'll find a place for it... best of luck with the swap.

did u have to remove the vtec solenoid or the oil pressure switch?

did u have to remove the vtec solenoid or the oil pressure switch?

naw it's tight, but it sits vertically in that back corner... i didn't remove nothing... if i had the effort in me, i'd get up and take a photo for you.. but yea - i pretty much don't.

I really could use a picture man, please lol

I really could use a picture man, please lol

ok .. tomorrow when it's light out i'll snap one for you... you aren't gonna be wowed or anything tho (: heh.

pictures r good regardless

pictures r good regardless

here ya be... like i said it's some old bojang L shaped bracket.. this one could use a lil trimming - but it does the trick...

http://www3.telus.net/abode/coil-mount1.jpg


and from a different angle.

http://www3.telus.net/abode/coil-mount2.jpg