Turbo KA Power...
monooxide
06-26-2005, 08:03 PM
I want to see what kind of HP range were looking at...
Stock Internals
5-6PSI
200-225
7-11PSI
230-265
12-16PSI
270-300
17-25PSI
310-350
26-31PSI
370-435
Stock Internals
5-6PSI
200-225
7-11PSI
230-265
12-16PSI
270-300
17-25PSI
310-350
26-31PSI
370-435
nissanfanatic
06-26-2005, 09:02 PM
Is this a question or what you have figured? Because those numbers are off. There is no set power level for a set PSI. Airflow is different at set pressures from compressor to compressor.
240SXSlideStar
06-26-2005, 09:29 PM
And is that whp or chp?
monooxide
06-26-2005, 10:05 PM
Those are just all guesses. I dont want definites i just want peoples numbers like NissanFanatic got from 5-6 PSI and then at 9PSI what he got or TatII what he got at his Boost levels. I just want a general range at what ill be looking at to get close to my friends RB25 Swapped 240 hell be getting it done in the beginning to mid August.
Hit_N_Run-player
06-27-2005, 12:06 AM
there are too many different variables that will detirmine the HP rating at a given PSI....you need a more defined question.
nissanfanatic
06-27-2005, 12:25 AM
Then get a generic idea of what turbo you will be running...
TatII
06-27-2005, 12:45 AM
15 psi can range anywhere from 280-350whp depending on turbo, and supporthing mods. if everything goes well i'll dyno this week and see how much power i'm making at 14.5 psi. ( i'm guessing 300whp ) but anthony made 345whp from 15 psi.
LaYzIeNoY
06-27-2005, 12:58 AM
you can't ask based on psi alone you need to list you supporting mods and turbo, you'll probably get the best info from the ka-t guys here, ka-t.org might help don't know personally though
7psi on a T25 is going to be alot different from 7psi on like a T88, its the difference in flow of the turbo
and someone correct me if i'm wrong but i don't think that the stock internals will hold up to good past like somewherin 15-20psi range
7psi on a T25 is going to be alot different from 7psi on like a T88, its the difference in flow of the turbo
and someone correct me if i'm wrong but i don't think that the stock internals will hold up to good past like somewherin 15-20psi range
TatII
06-27-2005, 01:01 AM
usually with good fuel management, the stock internals can handle 350whp pretty decent. whatever psi that is, it depends on the turbo.
nissanfanatic
06-27-2005, 01:22 AM
Power=airflow. Plain and simple.
monooxide
06-27-2005, 01:31 AM
They have held up to 450...I believe...
and lets say...
Stock Internals
GT28R DualBB
Turbine
-Wheel: 53mm w/ 62 trim
-Housing: .64 ar
Compressor
-Wheel: 60mm w/ 60 trim
-Housing: .60 ar
JWT or Enthalpy
550cc Injectors
255L Fuel Pump
Small FMIC
5-6 PSI and then 12PSI...
and lets say...
Stock Internals
GT28R DualBB
Turbine
-Wheel: 53mm w/ 62 trim
-Housing: .64 ar
Compressor
-Wheel: 60mm w/ 60 trim
-Housing: .60 ar
JWT or Enthalpy
550cc Injectors
255L Fuel Pump
Small FMIC
5-6 PSI and then 12PSI...
nissanfanatic
06-27-2005, 02:31 AM
They have held 404whp documented.
5-6psi, prolly about 220-230whp
12psi, prolly 320-330whp
GT series turbos are very efficienct making more power at lower boost.
5-6psi, prolly about 220-230whp
12psi, prolly 320-330whp
GT series turbos are very efficienct making more power at lower boost.
Automotive Network, Inc., Copyright ©2026
