Front axle removal 99 4x4

I'm having a problem getting the castle nut off the hub using a breaker bar and cheater pipe. Does anybody know the best way to do this? Do I have left hand threads on the driver side and right hand on the passenger side?

I don't know, but I'll be happy to bump your question back to the top. :thumbsup:

Might be a good time to go schmooze a technician at the dealership, find out from them the best way to go about it, since they've likely done several.

i had the same problem i had to use a 6 foot long cheater pipe and give it all i had and i weigh 250 pounds.. the threads should be standard left to loosey right to tighty hope this helps

Keep trying, standard thread just plain tight. Oh and good luck getting the wheel bearing out thats 100times worse.