Installing Air Intake
SlammedCivicSedan
04-20-2002, 02:38 PM
HEY ,
I NEED HELP PEOPLE,
WHEN I TOOK OF THE STOCK TUBING,
IT HAD THREE PIPES CONNECTED TO IT, ONE WAS A HARD METAL PEICE CONNECTED TO THE ENGINE AND THE OTHER WAS A RUBBER ONE AND THE LAST WAS A SENSOR. NOW MY NEW POLISHED TUBE ONLY HAS TWO HOLES.
HOW DO I PUT EVERYTHING BACK TOGETHER........
THANK YOU
I HAVE A 99 HONDA CIVIC EX
I NEED HELP PEOPLE,
WHEN I TOOK OF THE STOCK TUBING,
IT HAD THREE PIPES CONNECTED TO IT, ONE WAS A HARD METAL PEICE CONNECTED TO THE ENGINE AND THE OTHER WAS A RUBBER ONE AND THE LAST WAS A SENSOR. NOW MY NEW POLISHED TUBE ONLY HAS TWO HOLES.
HOW DO I PUT EVERYTHING BACK TOGETHER........
THANK YOU
I HAVE A 99 HONDA CIVIC EX
CivSiGuy
04-20-2002, 03:27 PM
http://www.automotiveforums.com/kris/kris/+junk/capslock2.gif
to answer the question. slide the rubber part over the metal pipe going to the valve cover and also slide it over the nipple on the intake. Plug the sensor back into the intake.
to answer the question. slide the rubber part over the metal pipe going to the valve cover and also slide it over the nipple on the intake. Plug the sensor back into the intake.
VTEC_boi
04-20-2002, 03:34 PM
YOU PLUG THAT THINGY INTO THAT OTHER THING W/ THE THING ON IT AND THEN WITH THE METAL THINGY YOU STICK IT ON THE RUBBER THINGY WITH THE THINGYS BUT MAKE SURE NOT TO TOUCH THAT ONE THINGY WITH THE THINGYS ON IT!
CivSiGuy
04-20-2002, 03:47 PM
Originally posted by VTEC_boi
YOU PLUG THAT THINGY INTO THAT OTHER THING W/ THE THING ON IT AND THEN WITH THE METAL THINGY YOU STICK IT ON THE RUBBER THINGY WITH THE THINGYS BUT MAKE SURE NOT TO TOUCH THAT ONE THINGY WITH THE THINGYS ON IT!
:rolleyes: thanks for the input
YOU PLUG THAT THINGY INTO THAT OTHER THING W/ THE THING ON IT AND THEN WITH THE METAL THINGY YOU STICK IT ON THE RUBBER THINGY WITH THE THINGYS BUT MAKE SURE NOT TO TOUCH THAT ONE THINGY WITH THE THINGYS ON IT!
:rolleyes: thanks for the input
SlammedCivicSedan
04-20-2002, 03:50 PM
but there is still a rubber hose, the stock hose that doesnt have any place to put it, what should i do with that one?
i put the sensor back and i also put the metal valve one into the body on the pipe intake.
is that right?
thanks......
i put the sensor back and i also put the metal valve one into the body on the pipe intake.
is that right?
thanks......
CivSiGuy
04-20-2002, 04:00 PM
where does the rubber hose go?
VTEC_boi
04-20-2002, 04:32 PM
Originally posted by CivSiGuy
:rolleyes: thanks for the input
No problem man! Anytime! :flipa: LoL
There shoud be like..2 holes on the intake. 1 of them is a little metal piece that sticks out and the other is just a hole, usually w/ a little rubber grommet-type-thing on it. There is a black silicon/rubber/whatever-the-hell hose that's like..on the back-side of the valve cover. Stick that on the metal shaft. Then, you hsould have removed a sensor from the stock intake. So...stick it in the other hole.
Wow, the first post that's on a diff. subject where i mention "shaft" and "hole" hehe
:rolleyes: thanks for the input
No problem man! Anytime! :flipa: LoL
There shoud be like..2 holes on the intake. 1 of them is a little metal piece that sticks out and the other is just a hole, usually w/ a little rubber grommet-type-thing on it. There is a black silicon/rubber/whatever-the-hell hose that's like..on the back-side of the valve cover. Stick that on the metal shaft. Then, you hsould have removed a sensor from the stock intake. So...stick it in the other hole.
Wow, the first post that's on a diff. subject where i mention "shaft" and "hole" hehe
Automotive Network, Inc., Copyright ©2026