clutch master cylinder

I'm putting a b16a2 w/hyd. tranny into my 91 civic hatch back. There doesn't look like there is enough room to mount the master cylinder. How do I do this?

thanks for any help

Hasport (http://www.hasport.com/Products/Mount%20Kits/Mount%20EFB2.htm)
This is the conversion kit you'll need. GL

^I was asking about the master cylinder not the transmission mount.

Hasport has a hydro to cable conversion kit, cost about $150. mounts on the tranny where the slave cylinder would be so you can use your original cable.
If you want to go hydro, you'll have to retro fit one from a 92-95 civic.