how to adjust valve lash

instaling new cam and roler lifters in 93 chevy full size pu 4.3... how do i adjust the back lasch on the rockers?

Don't take this the wrong way, but make sure your cam is a hydraulic roller cam. As far as back lash, roller lifters are probably different from standard hydraulic lifters. I guess I've never messed with rollers.

Don't take this the wrong way, but make sure your cam is a hydraulic roller cam. As far as back lash, roller lifters are probably different from standard hydraulic lifters. I guess I've never messed with rollers.
tirefryer93.. wich is the exhaust valve and which is the intake valve on 4'3. i found how to adjust the lash but it dont show which is which..

The exhaust valves line up with the exhaust maifold openings, and the intake valve lines up with its corresponding intake runner. You might want to get someone familiar with a engine to do this work. Just my .02 worth.

thanks for the answer, i went by the haynes book.i must have goten it right this engine cranked right over the lifters are a little noisy, but when the cam breaks in i will tighten them down again, i put a comp cam in its a little over but should give me more tork.. thanks