cd radio antithef sys ?

Hi everyone
I just bought a CHE VENTURE 97 6 month ago , now i just know my audio player is anti thef sys. I can not get intouch with the previous owner anymore for getting the audio code of my car in case of death battery. What should i do now ?.Go to dealler get a new code or ...
The audio is running now. THank you for all help.

I think thats all you can do. The manufacturer wont make it so just anyone can reset the code. i beleive its a dealership thing only. My buddy had it done and they did it for free.

the chevy dealer could do it for you , if they do charge a fee its bout 30 to 60 dollars.

I haven't tried this on my Venture, but you could give it a shot if you have lost the code. It's from the Silverado forum.

If you try this, please let me know if it checks out. This could save people a lot of time and money.


Date Published: 2002-05-26

Submitter's Name: Ioannis Hadjiioannou
Email Address: [email protected]
Corvetteforum.com Member Alias: Hex29a

The following procedure will give you a new code that you can use instead of your personal code. Using this new code, you can “unlock” your radio and then “re-lock” it with a new code if you wish. Prerequisites: The radio must be in LOC mode NOT in INOP mode. Let me explain. If you have activated the Theft-Deterrent feature of your radio and loose power, the radio goes into LOC (theftlock) mode. With the ignition on, you must use the MN and HR buttons to enter you personal code in order to unlock it (The instructions are on page 3-27 in your Y2K Owner’s manual). If you fail to enter the correct code eight (8) times, the radio goes into INOP mode. You have to wait an hour with the ignition on before the radio returns to LOC mode (go for a long drive somewhere).

Procedure:

01. Turn the ignition ON (The radio displays LOC)

02. Hold down the Radio Presets 2 and 3 buttons for six seconds

03. The radio display changes from LOC to a three-digit number. Write this number down. Don’t take forever, fifteen seconds max before the next step.

04. Press the AM/FM button

05. The radio display changes to another three-digit number. Write this number to the right of the first one.

06. You now have a six-digit number, the first three digits are from STEP 03 and the last three digits are form STEP 05

07. Call 1 800 537 5140 08. Press 1 then # (pound). You’ll hear “Invalid Code, try again”

09. Press 139010 then # (pound). You will be asked to enter your four or six digit code followed by * (start)

10. Enter the number from STEP 6 then * (star)

11. Listen to the four-digit number and write it down. It will be repeated twice

12. Turn the ignition ON (The radio displays LOC)

13. Use the MN and HR buttons to enter the code from STEP 11

14. Press the AM/FM button. The radio display changes to SEC Your radio is now “un-locked” and usable. The Theft-Deterrent feature is STILL active! If you want to disable it, use the instruction on page 3-27 in your Y2K Owner’s manual. Use the code from STEP 11 instead of your personal code.

Note: This tip originated from LOTZAHP, Austin TX (credit must be given where credit is due). I verified it on an Y2K C5 with a locked radio - mine.





I hope this helps, I found it on a corvette forum, should work fine with your radio. Again let me know how this turns out. Please.

Jake
-nineball :thumbsup:
__________________