01 Tiburon Remote Keyless Entry
oldmike
06-11-2005, 04:26 AM
Does anyone here have a 01 Tib that might have the "factory" keyless entry? That year there was no factory installed alarm/RKE but the dealer could get a Hyundai approved system by DEI and put it in. My 01 has it but I didn't get a remote as I bought the car as salvage and am rebuilding. I really need to know what the remote numbers are on the back.
Thanks a lot
Thanks a lot
free2roamaz
06-11-2005, 06:03 PM
Don't bother. If it is the same "Hyundai Approved" set up that was put in mine, then it is shit. I would personally un install all the wiring and everything and get a new one so you know what was connected, not connected ect. I got mine, and am still trying to figure out the wiring setup cuz the dealership didnt install ALOT of the wiring correctly. The lights dont flash when its locked or unlocked and it's a remote/alarm system, but most the time the alarm wont work unless I open and slam the trunk or a door while its armed.
If you still wanna try and roll with what you got, then lemme know and I will do what I can to help. Just tell me what info you can about your set up.
If you still wanna try and roll with what you got, then lemme know and I will do what I can to help. Just tell me what info you can about your set up.
oldmike
06-12-2005, 04:17 AM
free2roamaz:
Sent you a PM.
Sent you a PM.
ponchonutty
06-12-2005, 10:22 AM
The DEI piece is awesome. You just have to get the right installer to install it. PM me and I can walk you through the install. I've done tons of them and haven't had any comebacks.
oldmike
06-12-2005, 04:52 PM
Ponchonutty:
I already have the DEI 710 RKE and it was installed by the Hyundai dealer in 01 when the car was new. I just need to know what model of DEI remote will work with it as I didn't get one when I purchased the car last month.
Hope you can help. Thanks
Mike
I already have the DEI 710 RKE and it was installed by the Hyundai dealer in 01 when the car was new. I just need to know what model of DEI remote will work with it as I didn't get one when I purchased the car last month.
Hope you can help. Thanks
Mike
ponchonutty
06-12-2005, 09:55 PM
Ponchonutty:
I already have the DEI 710 RKE and it was installed by the Hyundai dealer in 01 when the car was new. I just need to know what model of DEI remote will work with it as I didn't get one when I purchased the car last month.
Hope you can help. Thanks
Mike
Do you know the name that's on the keyless brain? Is it just the part number or does it also say Valet or Automate or something simular? Also, can you get the date code off the back of it? If so, I can tell you what you will need.
I already have the DEI 710 RKE and it was installed by the Hyundai dealer in 01 when the car was new. I just need to know what model of DEI remote will work with it as I didn't get one when I purchased the car last month.
Hope you can help. Thanks
Mike
Do you know the name that's on the keyless brain? Is it just the part number or does it also say Valet or Automate or something simular? Also, can you get the date code off the back of it? If so, I can tell you what you will need.
oldmike
06-13-2005, 05:00 AM
Do you know the name that's on the keyless brain? Is it just the part number or does it also say Valet or Automate or something simular? Also, can you get the date code off the back of it? If so, I can tell you what you will need.
On the front it is totally blank. On the back it says "Directed Electronics Inc 710". And it has a listing of all the wire colors and functions. I went to the DEI site and found a Valet 710T model. I think since DEI made this one special for Hyundai, it may be a generic of the Valet. The date code sticker says "OK/1E". Even when opened up, there is no brand like Valet, Hornet, etc. Hope this helps. Thanks,
Mike
On the front it is totally blank. On the back it says "Directed Electronics Inc 710". And it has a listing of all the wire colors and functions. I went to the DEI site and found a Valet 710T model. I think since DEI made this one special for Hyundai, it may be a generic of the Valet. The date code sticker says "OK/1E". Even when opened up, there is no brand like Valet, Hornet, etc. Hope this helps. Thanks,
Mike
ponchonutty
06-13-2005, 10:23 PM
I think I have it narrowed down to 3 part numbers. Let me get ahold of my rep and I'll let you know.
oldmike
06-13-2005, 10:33 PM
Sure appreciate the effort.
Mike
Mike
ponchonutty
06-14-2005, 04:54 PM
TA DA!!! You need DEI part number 491t. That is their generic remote part number. You might find someone that has an Automate or Python remote but as long as the base part number is the same, you'll be OK. DEI just changes the remote cases on the remotes for the different lines. It's kinda like a GMC Sonoma and a Chevy S10. They are the same thing, just different in name!
If you still have problems, just let me know. I'll have to look around the shop for those older remotes. I can still order them though.
If you still have problems, just let me know. I'll have to look around the shop for those older remotes. I can still order them though.
oldmike
06-14-2005, 10:19 PM
Ponchonutty,
You are "THE MAN". My son-in-law has a Viper alarm and bought a 2nd remote for it recently, and it happened to be a 491t. I borrowed it and went through the steps shown on Hyundai Webtech site, and it WORKED!!! Several other people tried to help but they made things hard. All I really needed to know was what you gave me, the model of DEI remote I needed. Thank you so much for your time and effort.
Mike
You are "THE MAN". My son-in-law has a Viper alarm and bought a 2nd remote for it recently, and it happened to be a 491t. I borrowed it and went through the steps shown on Hyundai Webtech site, and it WORKED!!! Several other people tried to help but they made things hard. All I really needed to know was what you gave me, the model of DEI remote I needed. Thank you so much for your time and effort.
Mike
ponchonutty
06-15-2005, 07:38 AM
No problem. I was glad to be able to help.
Automotive Network, Inc., Copyright ©2026