Replacing belts in 1984 Cj-7

I just stumbled across this website!! I think i'm going to be coming back here often!!

I searched the site ( and the web, and my chilton's manual, etc) and have a dumb question.... I am replacing all my belts in my jeep [ 1982 cj-7 6cyl] . I am able to remove the first two ( closest to front of jeep ) by loosening the pivot bolt and the anchor bolt, getting belt slack. That part went fine. Now the tough part.... I can not find where/how to loosen the 3rd belt. I have been working at it for the past hour or so and can't find how to ge the belt off.

Please give me a hint!!

thanks in advance

Jim

Do you mean the Pwr Steering belt? If so You'l have to loosen the bolts on the backside of the pump bracket and the upper bolt, then take a wrachet and socket, there is an adjustment boly on the lower right side of the pump, hard to see and a tight local. Hope this helps.

Yep. How did it come out?

if it still didnt come off i can take pics of my cj-7 and show you what to do...