Massive Wheel Hopping
crabby760
06-04-2005, 03:52 PM
after i built my single cam vtec.... i have massive wheel hop
how can i prevent this i'm affraid i will be breaking axels left and right?
wat can i do or buy in order to stop the wheel hop
how can i prevent this i'm affraid i will be breaking axels left and right?
wat can i do or buy in order to stop the wheel hop
slate
06-04-2005, 04:39 PM
Urethane motor mount inserts helped my wheel hop a lot. And its a cheap fix. You can pick up a set for around $25.
crabby760
06-04-2005, 04:45 PM
ok cool... anything else i can do to prevent wheel hop besides the urethane inserts?
97integrals
06-04-2005, 04:57 PM
after i built my single cam vtec.... i have massive wheel hop
how can i prevent this i'm affraid i will be breaking axels left and right?
wat can i do or buy in order to stop the wheel hop
Traction bars=no more wheel hop
Best traction bars made (in my opinion):
http://www.full-race.com/catalog/index.php?cPath=334_199
how can i prevent this i'm affraid i will be breaking axels left and right?
wat can i do or buy in order to stop the wheel hop
Traction bars=no more wheel hop
Best traction bars made (in my opinion):
http://www.full-race.com/catalog/index.php?cPath=334_199
efSedan
06-04-2005, 09:30 PM
is there a less expensive option for traction bars for an ef? i don't want to get cheap shit but can't spend $450 right now.
Ace$nyper
06-04-2005, 09:33 PM
is there a less expensive option for traction bars for an ef? i don't want to get cheap shit but can't spend $450 right now.
there is the L con and Jim fab also good parts for less.
I must agree full race is best my buddys got one on his rex its a badass part.
there is the L con and Jim fab also good parts for less.
I must agree full race is best my buddys got one on his rex its a badass part.
efSedan
06-04-2005, 09:42 PM
how does this knock off ebay part look?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=42609&item=7978700880&rd=1
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=42609&item=7978700880&rd=1
SiGNAL748
06-04-2005, 11:59 PM
Any traction bars made for a 92-96 Prelude? My wheels hop like bunnies. Especially when I hit 2nd too hard.
97integrals
06-05-2005, 12:46 AM
Any traction bars made for a 92-96 Prelude? My wheels hop like bunnies. Especially when I hit 2nd too hard.
I have never seen any, but I know full race does a lot of custom work you could give them a call. It would probably cost a fortune but they might make you some.
I have never seen any, but I know full race does a lot of custom work you could give them a call. It would probably cost a fortune but they might make you some.
Kven
06-05-2005, 09:35 AM
is there a less expensive option for traction bars for an ef? i don't want to get cheap shit but can't spend $450 right now.
they have spherical bearings for the stock radius arm that you can use.
http://www.sbmsinc.com/race_shop.html
(Radius Rod bushings)
they have spherical bearings for the stock radius arm that you can use.
http://www.sbmsinc.com/race_shop.html
(Radius Rod bushings)
Ace$nyper
06-05-2005, 11:03 PM
Any traction bars made for a 92-96 Prelude? My wheels hop like bunnies. Especially when I hit 2nd too hard.
waahahahhah
take your coat off you live in my sig might as well get cozy!
waahahahhah
take your coat off you live in my sig might as well get cozy!
duffman868
06-06-2005, 12:18 AM
if you are good at fabbing you can build you own traction bars they might not work as good as the other one but unless you are pushing over 300hp you should be fine with polyurethane mounts and a homemade traction bar
crabby760
06-20-2005, 10:08 PM
i replaced my timing belt and they did the timing rite on the money... rite now my distributor is pushed all the way forward towards the intake manifold... and my cam gear is at 3 markes retarded
now when i floor it THERE"S NO POWER WHAT SO EVER!!!!
any ideas
now when i floor it THERE"S NO POWER WHAT SO EVER!!!!
any ideas
97integrals
06-20-2005, 11:13 PM
i replaced my timing belt and they did the timing rite on the money... rite now my distributor is pushed all the way forward towards the intake manifold... and my cam gear is at 3 markes retarded
now when i floor it THERE"S NO POWER WHAT SO EVER!!!!
any ideas
WTF??? why are you posting this in this thread?
now when i floor it THERE"S NO POWER WHAT SO EVER!!!!
any ideas
WTF??? why are you posting this in this thread?
crabby760
06-20-2005, 11:16 PM
this was my thread to begin with.....
97integrals
06-21-2005, 12:37 AM
this was my thread to begin with.....
yes, but it has nothing to do with wheel hop.
yes, but it has nothing to do with wheel hop.
crabby760
06-21-2005, 12:50 AM
can sumone please answer my questions the best they can....
97integrals
06-21-2005, 01:28 AM
can sumone please answer my questions the best they can....
did you set the timming or have a shop do it? Why did you retard the cam gears three notches? I would set the cam gears to 0 and redo the timming. Then if you really want to get some use out of the cam gears hit the dyno to find the optimal setting.
did you set the timming or have a shop do it? Why did you retard the cam gears three notches? I would set the cam gears to 0 and redo the timming. Then if you really want to get some use out of the cam gears hit the dyno to find the optimal setting.
Automotive Network, Inc., Copyright ©2025