'83 Suburban tranny
tomkr101
06-01-2005, 10:18 PM
I have '83 350ci with 700R4 tranny. It's shot. Can I replace with Turbo 350c out of an '82?
Thanks
Tom
Thanks
Tom
bduff509
06-01-2005, 10:58 PM
Your selector won't match. You could also change steering columns to an older one or just go to a floor shift. I'm not sure but I think the 700 is a little longer. You may also need the front half of the '82's drive shaft. If you're going to make the change, try to find a good 400. I have an '81 with 454 & TH400 that towed my stock car & a lot of tons of scrap for 7 years & it's still running good. There's no body left but mechanically it's in good shape.
tomkr101
06-01-2005, 11:18 PM
Would there be modifications needed for the Turbo 400 as far as you know? Would I have to change the column? The indicator doesn't line up anyway!
Thanks for teh quick reply.
Thanks for teh quick reply.
bduff509
06-01-2005, 11:40 PM
I have a few 350's & 400's around here as well as 700's in vehicles. I have an '83 Blazer with a 700 in it here so I can get some measurements off of them & try to see what you may have to do. The 400 is a 3 spd. like the 350C so the selector problem won't change. Your highway gas mileage is going to go down a little without the overdrive but, in my opinion, I'd rather have an older, more durable, transmission & suffer with slightly worse milage. If you're working it hard or towing you can't run OD anyway. I'll try to get back to you tomorrow with it.
Automotive Network, Inc., Copyright ©2026
