Modelling Space

Hey guys and gals,
Post pictures or descriptions of your modelling space. Here is a picture of mine with annotations/descriptions (but only because I got bored).

I have 5 Tamiya spray can, 1 Tamiya Primer, Two Tweezers, 1 Roll of Duct tape, about 36 hand paint jars from Model Masters, Tamiya and Gunze Sangyo. 1 Tamiya Saw and 1 generic hobby knife. 1 thing-o-Elmer's glue.

http://files.automotiveforums.com/uploads/635474modelspace.jpg

I split my work area into two areas, painting and assembly. Here's my painting area

http://files.automotiveforums.com/uploads/498392work.jpg

28 Tamiya paints, 4 Model Masters, 1 Gunze Sangyo. 3 cans of automotive primer in the background.

12 airbrush mounting sticks made from alligator clips and q-tip sticks, Parafilm M for masking, die-cast Audi TT that I made one day when I got bored.

Here's the assembly room
http://files.automotiveforums.com/uploads/422609work1.jpg

All my sandpaper, polish, glue and side cutters, reside here, nothing to mention really

oh man, must be nice to have a modeling desk :o

I just work on my models on my computer desk... then paint in the bathroom... stink up the house with paint, then get in crap with my mom :o

Bit of a old pic....but this is what things look like most of the time. My 30 odd spray cans i keep stored in the cupboard.
http://files.automotiveforums.com/uploads/462656work-table.jpg

Here are acouple pics of my modeling table... some are of it in use and some are not :D

http://fpfc.virtualave.net/pics/table1.jpg
That needle(suringe[sp]) at the bottom is amazing, i suggest all of you guys, if you don't have one similar, to get one, i mainly use it for getting alchole out of the bottel to thin my paint for airbrushing and conventely, it right in the top of the bottel but wont fall through:). you can use exactly the amount you want to, you can also use it to mix exact amounts of paints together (20% of black to 80%red for ex.)

http://fpfc.virtualave.net/pics/table2.jpg
*Notice the clerks poster i got for a buck:)

(Older Pics)
http://fpfc.virtualave.net/room/room1.jpg
http://fpfc.virtualave.net/room/room4.jpg

I'm not going to list what i have there but my compressor is located right underneith the table for convience.

Haha your modeling table looks exactly like my assembly table before I raided the table downstairs

What kinda Paasche is that? VL? And is that an airbrush holder or a parts holder in the first pic>

Yeah, it's a dual action VL, it's my first airbrush and i must say i like it:)

http://fpfc.virtualave.net/pics/holder.jpg

That funny thing there is a great piece holder when i need to paint something and A) don't want to touch it, or B) let it dry while i paint something else.
I think they sell them at hardware stores and radioshack.

nika

Here is a picture of the assembly and hand paint area:
http://files.automotiveforums.com/uploads/685575modassembly.JPG

Here is a picture of my current body painting area (just on the floor of an empty room):
http://files.automotiveforums.com/uploads/144681modpaintcurr.JPG

Here is where the operation will be moved to in about a week or when i finish painting the GNX:
http://files.automotiveforums.com/uploads/334412modpaintfut.JPG

Well my modelling area is in my parents garage, I have 1/2 a can of primer, black, aluminuim, felsh and red paints, some cement, some brushes, making tape and a Scalpel

i moved my painting area outside to the garage like i said. the spray cans are off to the right. future mods might be higher walls and even a roof to go on it.http://files.automotiveforums.com/uploads/378573modpaint.jpg