Our Community is 940,000 Strong. Join Us.


Weak Sauce Offset (RW240, you're ganna like this one)


240SXSlideStar
05-29-2005, 01:27 AM
There has been a lot of discussion about offsets and rim sizes and some have been weakish, yet some keep saying that 17x9 is big.

Behold, the Drift Factory's S13 project car's shoes!

Work Meister S1 in no less then....

18x9.5 -14 offset!!! (Front)
18x12 -43 offset!!! (Rear)

That will be on an S13 hatch. (Widebody lol)

http://www.driftfactory.com/s107.jpg
http://www.driftfactory.com/s103.jpg
http://www.driftfactory.com/s111.jpg
http://www.driftfactory.com/s109.jpg

They haven't mounted them on the car yet, though.

www.driftfactory.com

monooxide
05-29-2005, 01:31 AM
WEAK!!!

R.W.240
05-29-2005, 11:57 AM
CHOPPAH STYLEZ!!!!!11!!!!



Aren't they using a KA? it might have some trouble spinning those :eek:


one of my freinds dow here is trying to get 18x10 -24 for the back of his S14 but the only US dealer is Discount tire so you guys can Imagine how thats going.

240SXSlideStar
05-29-2005, 02:45 PM
lol, he'll never get them :-P, actually they are dropping in an RB26DETT.

leestewart
05-29-2005, 11:56 PM
them wheels are retarded!!!!!!

nisco
05-30-2005, 12:14 AM
now thats a fatty

240SXSlideStar
05-30-2005, 01:48 PM
But it's cool so it's an even trade.

shawn_carter69
05-30-2005, 02:08 PM
it will look sic, but i mean if you're gonna build a trailer queen...

monooxide
05-30-2005, 02:09 PM
Wil me getting 17x9s be stupid? I mean Ill need them later but...Is taht too big for only like 140 whp?

shawn_carter69
05-30-2005, 02:11 PM
Wil me getting 17x9s be stupid? I mean Ill need them later but...Is taht too big for only like 140 whp?

you wont be going too faast at the moment but i mean depends on what you want the car to be.

you want a trailer queen?
you want drifter?
you want a dragger?

christophv
05-30-2005, 02:13 PM
SEKSI!

how much did you pay for that / how much are they?

what about the offset, and you would need large spacers, won't you?

240SXSlideStar
05-30-2005, 03:18 PM
SEKSI!

how much did you pay for that / how much are they?

what about the offset, and you would need large spacers, won't you?

If your asking those questions about the huge ass Work rims, then read the whole post, they are for the Drift Factory shop car, I dunno anything about how much they were or how they will make them fit.

AWDSR20
05-30-2005, 03:19 PM
dude, thats just tooo big.. when i drift with my SR i use 205 tiers... the whole point is to SLIDE!!! not GRIP!!! i don't get it when people use BIG tiers on drift cars. last weekend on drift day, a dude was using 245 tiers. ???? damn why?


i don't know why in the hell drift factory r using such big tiers. i know that RB26 will push the 275 tiers but??? why?!

240SXSlideStar
05-30-2005, 03:20 PM
Those are only going to be used for shows, photo shoots and time trialds, they are using other rims for drifting.

nissanfanatic
05-30-2005, 07:01 PM
I think they are pretty sick rims. A highly tuned SR could beneifit fromt them IMO.

them wheels are retarded!!!

lol.....them sure are!!

240SXSlideStar
05-30-2005, 07:18 PM
I would have rather spent the money on a bottle of jeigermeister, a hooker, and a hotel room on the beach

These guys aren't taking this money out fo their pocket, it's all shop money, tax deductible, they have as much as they want (well, almost), so they can have the booze, the hooker, the hotel room and the rims!

AWDSR20
05-30-2005, 07:21 PM
Lol!

240SXSlideStar
05-30-2005, 07:42 PM
Who cares if they are not good for performance, they look cool, and not every car in the world has to be driven, some can be trailer queens.

Hawaiiandrifter
05-31-2005, 01:52 AM
I saw those for sale at www.takumiproject.com (http://www.takumiproject.com) and i think they wanted like $2450. I think those are the rims cause those are the only work meisters that i have seen in blue. They were also the same size and offset.

240SXSlideStar
05-31-2005, 07:06 AM
Yeah, and the ones they are using don't look brand new.

R.W.240
05-31-2005, 01:07 PM
Yeah, those are the wheels from takumiproject.com (I met some of their guys out in cali, nice bunch) apparently they were sold to some guy who clouldnt make em fit so Drift Factory Bought them.

For gods sakes SR20power, everyone here knows about unsprung weight. Saying that a 275 tire and a extremely wider track than any onther wheel on the market isnt gonna help preformance is wack.

Using big tires on a drift car is about big smoke and big control. 95% of the D1 level cars use a 265/18 in the back and the extra stablility that -24 offset is gonna offset any weird unsprung weight issues.(also they had custom made coilovers made with a wheel this big in mind) I gather that these will be the Time Attack / Drift wheels but they want a different set for the street.


Honestly I still dont know how is car is gonna turnout. I usually dont like widebody fastbacks... or coupes for that matter. Those wheels and Custom coilovers move the car into contention for best handling 240 Evar but I dont know if drift factory is going to be able to make the peices work together. we'll see.

240SXSlideStar
05-31-2005, 01:13 PM
They are not using those for drift, they are using those wheels for time trials and photo shoots only.

TatII
06-01-2005, 09:19 AM
the wing is very functional. cause if you see them do drift runs at tsukuba circuit they go get quit fast. and hey usually drift at 70mph. also they do mostly have over 400whp. and most do run 245's but on a 18x10 rim. this means that the sidewalls are practically non existing. so i dont know what kind of handling characteristics it gives, but they all do it and i'm sure there are OTHER reasons to do it besides for looks.

personally i think the overly wide wheel and stretched tire look is retarded. however the only riced about the drift car is the stickers. when keichi tsuchiya was racing the AE86 class compitition, his special AE86 did not have a wing, and you can really see his ass gets twitchy even in low speed corners. he was complaining how he had no wing at all on that car. so obvious a wing does do something cause if you compared the way the non winged AE86's was cornering compared to the ones with a GT wing, you would understand they do something to.

R.W.240
06-01-2005, 12:48 PM
they use wider wheels on drift cars because if you haven't noticed... THEY ARE ALL RICED THE FUCK OUT! lol


Yeah thats it. If only people drifted weaksauce sunken battleship Impalas with 7.5wide wheels, man that thing would drift :gay:


and also its not about who goes the fastest and counting tenths of seconds on lap times. they don't care if they add something and it makes them slower but look cooler. everyone of those d1 cars is mainly geared towards looks. Sure they can be banged up a bit from use, but they all have wings and outlandish body kits, wide fenders, fender flares, hoods, vents, and big ass wheels. Of course none of that stuff actually makes you faster........


Yeah I guess thats why they dont have roots blowers. :gay:


how many F1 cars you see running Chrome wheels with da spinnaz?

That would be hott... Hottness aside though, why do you always bring up completely Irrelvant facts? F1 cars besides fighting over .25 grams have a mandated tire size so the rim is the lightest possible for its size. you were arguing for light wheels but forgeting width on the basis that 275s made your implala handle less shitty. so wider tires couldnt possibly help a lighter car? even a retard can figure out that the recipe for High G is Big tire and Small Weight. Shalom is a different story but when you've got a good Skidpad car your more than half way there.


Mildly Stretched tires are there for Progressive Breakaway... Extreme stretch has the same effect but its there mainly for Big Dish. I Agree with everything TatII said... the stickers are getting weak.

Anyone seen the new T&E D1 Aristo? 930WHP anyone?

ghostchild316
06-01-2005, 01:18 PM
Wil me getting 17x9s be stupid? I mean Ill need them later but...Is taht too big for only like 140 whp?

HA that is what Im gonna get for the FRONT.235/40-17.I'll stuff some 17x10's in the back with 255/40s mounted on them.Of course by the time I get wheels and tires I'mma be rolling KA24DET

R.W.240
06-01-2005, 01:20 PM
HA that is what Im gonna get for the FRONT.235/40-17.I'll stuff some 17x10's in the back with 255/40s mounted on them.Of course by the time I get wheels and tires I'mma be rolling KA24DET


17x9 +20 225/45 Here - Socal Sackrider Flush Club #1

nissanfanatic
06-01-2005, 02:21 PM
hahahahhahahahahahahahhahahahah RW. Team la impala roots blower resitiance!!!!!!!

240SXSlideStar
06-01-2005, 10:04 PM
and also its not about who goes the fastest and counting tenths of seconds on lap times. they don't care if they add something and it makes them slower but look cooler. everyone of those d1 cars is mainly geared towards looks. Sure they can be banged up a bit from use, but they all have wings and outlandish body kits, wide fenders, fender flares, hoods, vents, and big ass wheels. Of course none of that stuff actually makes you faster........


Well JGTC cars have bodykits, , widebodies, wings, vents, stickers and 13 inch wide wheels and they are counting tenths of a second, same with with the Sun Auto Evo that beat the Tsukuba record and if he was a tenth of a second faster, he would cry out of happiness.

Add your comment to this topic!