transmission filter change.

Hi,

I'm trying to change the automatic transimission filter in my 93 4runner (3.0L V6). I have drained all of the fluid and removed the, what seemed like 85, bolts holding the pan up.
Unfortunately, nothing is moving. I can't seem to get the pan off to get at the filter. Am I missing something? Any suggestions would be helpfull.

Thanks in advance,

Neil.

Do I need to remove the filler tube? If so how and where do I detach it?

Thanks again.
Neil

It may separate into two halves, upper and lower. Also, might be the sealant holding the pan on to the tranny case.

I have been told that you don't have to replace the transmission filter. It is only a screen to prevent large particles from getting into the pump and valve body.

It may separate into two halves, upper and lower. Also, might be the sealant holding the pan on to the tranny case.

How do you get the sealant off?

Get a long scraper or flat-head screwdriver and carefully pry it off. On my 2000 4runner I was told at the dealer parts department that I didn't need to replace the filter. Mine had 100,000 miles on it and their was nothing in the screen.

Hi,

I'm trying to change the automatic transimission filter in my 93 4runner (3.0L V6). I have drained all of the fluid and removed the, what seemed like 85, bolts holding the pan up.
Unfortunately, nothing is moving. I can't seem to get the pan off to get at the filter. Am I missing something? Any suggestions would be helpfull.

Thanks in advance,

Neil.

When I change mine out on my 92 I had to remove the crossmember to get the pan to drop all the way out.

Got it out thanks!