Pictures

Hey guys i was looking for pictures of the S-10 w/ a few custom options on the internet but i couldn't find it, and im sure yall have pictures that will help me out a lot. I am actually looking at the S-10, and after i buy one i am looking into putting some A/T tires on it. I like the 15x8 black rims w/ 33 x 12.5 tires. Will these fit w/out adding a lift? I dont want to lift it real high, i just want an S-10 that has big tires that is still functional. I like subtle, not extreme. Thanks for any help.

www.cardomain.com

Thousands upon thousands of s 10s there. enjoy.

You'll probably need about 3, and possibly 4" of lift for those tires. I would try a 2" suspension lift first and if you need more height use a body lift

They sure look good when they're done though.

you need a 6" lift to clear 33's , and even then they may rub on the lower portion of the front bumper , and unless you have the proper offset wheels , theyll rub on the frame when you turn , i know from personal experience that a 2" lift will clear 31's , also the prob with bigger tires - the bigger the tire , the more stress your gonna put on the suspension components - wheel bearing and axle bearings - youll wear them out much quicker then normal , but yeah , far as tires , i had very good luck with BFG a/t's , excellent on and off road traction , good tread wear , and virtually no road noise , anyways , good luck

I don't like BFG tires, but your right about them. That's what came on my Blazer, and that thing amazes me where it goes.

ive been looking for cardomain.com forever. I couldn't remember the name of the site to save my life. Are 33's too big for an S-10? should i go down to like a 31? what does the ZR2 have on it?

For a 33" tire you will need a 4-6 inch suspension lift and a 2" body lift with some fender trimming. Even with that you will have some frame rub.

ive been looking for cardomain.com forever. I couldn't remember the name of the site to save my life. Are 33's too big for an S-10? should i go down to like a 31? what does the ZR2 have on it?
Zr2s have 31s.They just clear on the front.

how much lift does the ZR2 have? i like the look of the ZR2 but im lookin for a black rim so why not just do it myself?

the zr2 is about 3" higher than a stock s10

http://www.zr2.com/images/home_page/s10_zr2.jpg

31 inch tires with a 3 inch lift would get me the same set up as a ZR2, i like this. Is there anything else that you would reccomend doing if i were to start this set up?

what width is the ZR2's wheels?

can yall give me a website that has S-10 lift kits on it, as well as S-10 mods? Thanks

Try these guy's.
http://www.truckn-store.com/product_list.asp?id=2187
You'll want their control arms, torsion bar keyway lift, and probably shackles for the back. If you plan on hauling lots or towing get extra springs in the back instead of shackles, although the ride is harder

Also try a Google search, there are several other companies out there

what is the difference in a regular S-10, and a ZR2 other than the bigger tires, as well as body lift?

what is the difference in a regular S-10, and a ZR2 other than the bigger tires, as well as body lift?

No body lift stock on the zr2...

*

RPO ZR2 only full ladder-type frame with modified suspension mounting points which provide:

*

100mm wider track (3.9 inches wider than regular S-10)

*

Three-inch suspension height increase

*

Enhanced front (7.25" ring gear) and rear (8.5" ring gear) axles w/ 3.73:1 rear-axle ratio

*

Larger wheel and axle bearings

*

31 x 10.5R-15 LT/C black wall off-road tires (BFG A/Ts on pickups and BFG Long Trails on BlaZeR2)

*

46mm gas pressurized Bilstein Monotube shocks

*

Rear axle track bar (pickups) / rear sway bar (BlaZeR2)

*

Wheel flares (black on S-10 pickups and BlaZeR2 / body-color on Sonoma pickups)

*

33mm (early model) / 28mm (late model) front anti-sway bar

*

Skid plates