any one take a mirror apart?? i need help!

i am going to take the mirrors apart and i dont know how to get the glass out of them? does any one know how. i got the mirror off the truck and i got the chrome covers off, they just had double side tape and like 4 clips that held them off. but i am not having any luck and taking the glass out or taking the housing apart. help would be great thanks guys

Very carefully, VERY CAREFULLY.... tip the glass and get a pry bar under so the tip of the pry bar goes close to the center and push up. I've wondered if you can reach the locking tabs at the circle and pull a few loose and then pull the glass off. Good luck, I've got three off successfully and two broken. Not great odds for me.

i got it apart. its actually not that bad. i tipped the glass and then i got a long skinny screw driver and i popped like 4 clips loose and then is just unsnapped around slowly and came off and the the rest of the mirror came apart with clips and a few screws here and there.

i am painting my mirrors once i get them done i will post some pics. then once the mirrors are done its the tailgate handle then the drill and ................. it never ends hahaha

While u got your mirrors off, you ought to upgrade to those with the turn signals in them.

what do i have to do to add the turn signal mirrors? i will do it if it isn;t alot more work. i already have one mirror sanded down and getting ready to paint. do i just need new glass and then run wires or what? thanks

I'm not sure exactly

One wire to ground on the door, one wire to the cluster under the dash per door. Simple, well worth the time. Found mine on eBay, came with directions.

what kind did you get and how much are they?

Make sure they are the Muth, they are direct replacements for the '03 and up models like Tahoes, Yukons and other GM lines. They are quality mirrors. I got mine off eBay delivered for something like $175, can't remember, with the extra wires and directions included.