before i install

What hoses do i need? Like the radiator hose and shit like that. I know i'm gonna replace the timing belt and water pump. The wiring seems easy but the hoses is what bothering me. I just need new hoses. If someone can provide me with part number that'll be great. Thanks.

upper radiator hose - 95 del sol VTEC
lower radiator hose - 90 crx si or probably 95 del sol VTEC

im pretty sure that that's all of the hoses that i needed.....i would STRONGLY RECOMMEND HOWEVER TO REPLACE EVERY SINGLE RADIATOR HOSE ON THAT ENGINE. i didn't and i have had to replace almost every single hose because they've sprung leaks. almost every hose can be sourced off of a 95 del sol VTEC. (DOHC not SOHC...that's the si.)

Originally posted by Fishcat37
upper radiator hose - 95 del sol VTEC
lower radiator hose - 90 crx si or probably 95 del sol VTEC

im pretty sure that that's all of the hoses that i needed.....i would STRONGLY RECOMMEND HOWEVER TO REPLACE EVERY SINGLE RADIATOR HOSE ON THAT ENGINE. i didn't and i have had to replace almost every single hose because they've sprung leaks. almost every hose can be sourced off of a 95 del sol VTEC. (DOHC not SOHC...that's the si.)

Well is that all the 2 hoses that i need? OF course i'm gonna replace them cause i cut them off already. I just went out to buy the water pump, timing belt and distibutor cap. I think i got the wrong dist. cap. I asked for the del sol dohc one and they gave it to me. Well i'm gonna go check it out to see if its rite or not. thanks

Ok i just found out that the distributor cap doesn't go with my b16. Its totally different. I have to go back to Napa and return it. Does the ' 99 - '00 SI one works? Thanks.

from www.hasport.com

Upper radiator hose : 92-93 Integra GSR, Acura part number 19501-PR3-000. Trim to fit.

Lower radiator hose 90-91 Integra, Acura p/n # 19502-PR4-A00. Trim to fit.

Distributor cap 90 Integra

I followed this list closely, the swap goes on this weekend, I'll let you know the results

Originally posted by ricodemus
from www.hasport.com

Upper radiator hose : 92-93 Integra GSR, Acura part number 19501-PR3-000. Trim to fit.

Lower radiator hose 90-91 Integra, Acura p/n # 19502-PR4-A00. Trim to fit.

Distributor cap 90 Integra

I followed this list closely, the swap goes on this weekend, I'll let you know the results

Oh alrite man thanks alot yo!:)

Originally posted by ricodemus
from www.hasport.com

Upper radiator hose : 92-93 Integra GSR, Acura part number 19501-PR3-000. Trim to fit.

Lower radiator hose 90-91 Integra, Acura p/n # 19502-PR4-A00. Trim to fit.

Distributor cap 90 Integra

I followed this list closely, the swap goes on this weekend, I'll let you know the results

This list is correct except that I found that the 92-93 GSR radiator hose was too short. So I got an extra lower hose and cut it to fit since it had approx. the same bend to it on the one part as the gsr hose. It worked perfectly.:)

Originally posted by 91zc


This list is correct except that I found that the 92-93 GSR radiator hose was too short. So I got an extra lower hose and cut it to fit since it had approx. the same bend to it on the one part as the gsr hose. It worked perfectly.:)

So i get 2 lower hoses or what? :confused:

Originally posted by 91zc


This list is correct except that I found that the 92-93 GSR radiator hose was too short. So I got an extra lower hose and cut it to fit since it had approx. the same bend to it on the one part as the gsr hose. It worked perfectly.:)

yeah, do you mean another gsr hose? or you sourced from a different car that looked similar? I just read on there that I need the damn teg rear mount bracket. I hope my motor has that shit on it, since it was supposed to come with mounts. damn...

I wonder if i need that rear integra mount bracket?? I have HCP and it came with 4 mounts so i'm not sure if i need it or not? Do i?

between my site and the hasport site, the swap should be a snap!

about the mounts...... first off, you cant use stock mounts. Secondly, no matter what kit you use, you still need the rear bracket from a 90-93 teg..... c'mon guys this stuff is cake!

Just gotta look around.....

hah, shoulda known Phatwippin would say something about the rear mount (after reading the webpage). I was happy to see that I did get the rear mount for the SiR, otherwise I woulda been screwed because the closest teg mount was in Georgia. Of course I got the billet HASport mounts! The old motor is out, starting on the b16! later

Originally posted by ricodemus
hah, shoulda known Phatwippin would say something about the rear mount (after reading the webpage). I was happy to see that I did get the rear mount for the SiR, otherwise I woulda been screwed because the closest teg mount was in Georgia. Of course I got the billet HASport mounts! The old motor is out, starting on the b16! later

you wanna see who can get done first?;)

well, I'm not really doing it, I'm kinda watching and learning. but we'll see who gets done first....