16g install kit the same as 14b?

http://www.extremepsi.com/store/customer/product.php?productid=17009&cat=336&page=1

will this fit on a 14b turbo, mainly the oil feed/return lines and bolts and washers?

sorry for all the questions lately, i think this is the last one though

Yes, that should work with a 14b as well. Don't forget your option to piece together a kit if you want to save some money. You could probably buy a new SS oil feed line from Extreme psi, and find the other parts used, and save yourself $100. But if it's not worth the time, or you're fine with paying $175, go with the new kit :)

What I did was peice together my own kit. It is way cheaper then buying a pre-made one. Most of your gasket can be reused, mine were in good condition but I had new ones, so I used the new one. You can buy a J-pipe used of dsmtuners for pritty cheap, and I got my oil feed line for extremepsi.

What you need:
Oil feed line
Oil drain Gasket
J-pipe

What you can reuse:
Manifold to turbo gasket
o2 gasket
Oil drain line (with a little modification)

I think thats about it.

You will have to get new bolts for the oil drain line that bolts to the turbo. The size is a little different.
Hope I didnt forget anything.

j pipe is taken care of, licp dejon fits, new clamps and what not for 75

yes, same exhaust and intake housings.