driver side halo question

Hello,

I have a 96 civic and I reciently got halo's for my car. I hooked up the passenger halo to the passenger parking light which was no problem.... now comes my question.... What is the easiest way to get to the driver side parking light wires?? They seem to be very well hidden and very hard to get to due to all of driver side engine components. If you have done this to your car then you know what im talking about. Thanks.

The Biggest Help I Received When Buying My Civic Was Buying The Chiltons Manual For My Car. It Has The Routing For All Lighting Wire Etc.

Jim

:-)

What do you mean by halo? Halo projector lights?

What i did on my halo projector lights was to take off my bumper. There are 4 screws that hold in the headlights. Two on top, and one on each side. If you wire ur halo's up by taking ur ground of ur halos and hooking them to the groundon ur parking lights, you'll end up blowing ur fuse. Better off hooking those grounds of the halo's to the engine bay somewhere. Better ground. So to wire them, use the positive of the halo, to the positive of the parking lights. Use the ground of the halo to the engine bay. Should be a screw near the two screws of the headlights somewhere. Use that. Hope this works...good luck

thanks for the help