Progress - Civic Ferio Veilside

Hi, this is my Civic Ferio Hasegawa:

Original:
http://users.skynet.be/tuningcars/Honda/FerioVeilside/CivicFerio-Ph0-Front01.jpg
http://users.skynet.be/tuningcars/Honda/FerioVeilside/CivicFerio-Ph0-Side01.jpg
http://users.skynet.be/tuningcars/Honda/FerioVeilside/CivicFerio-Ph0-Rear01.jpg

Program:
- Veilside bodykit bumpers, sideskirts, bonnet (from SAS kit for the Civic 1/25...) and mirrors.
- Bacarra 18" wheels.

Sideskirts:
http://users.skynet.be/tuningcars/Honda/FerioVeilside/CivicFerio-Ph0-Side02.jpg
http://users.skynet.be/tuningcars/Honda/FerioVeilside/CivicFerio-Ph1-Side01.jpg

The new front, a little difficult to adapt but the result is good...
http://users.skynet.be/tuningcars/Honda/FerioVeilside/CivicFerio-Ph1-Front01.jpg

The rear bumper, I've kept a part of the original bumper to have a nice shape for the fender...
http://users.skynet.be/tuningcars/Honda/FerioVeilside/CivicFerio-Ph1-Rear01.jpg
http://users.skynet.be/tuningcars/Honda/FerioVeilside/CivicFerio-Ph1-Rear02.jpg

This car will be very slow built... no stress :evillol:

If you have suggestions.....

that hood looks like its going to be very hard put back together. looks like it could turn out good.

WoW. That's some crazy modifications. Good luck on finishing it.

That's exactly what I was trying to do with mine 3 years ago!! I was trying to fabricate mine from scratch but lost interest. Since you are using the SAS parts, I'm sure yours will shape up well. Good project. Keep us updated.

http://www.automotiveforums.com/vbulletin/images/icons/icon14.gif to 4doors!

But don't those skirts block the rear doors?

:thumbsup: to how it looked originally

I'm not too sure im liking it though:( The shaved lisence plate area is not my style. Good luck with the car!

I think it's looking pretty good thus far, Keep it up :smokin:

Wish you luck on this ferio! :)

Looks like this has the potential to turn out quite well. I hadn't considered the possibility of people using the parts with this kit, I'm interested to see the results.

Just a couple of suggestions if I may... Might be worth slicing the rear bumper further more in order to get the edges lined up with the wheel arch. This will give you a nice crisp edge and you will only need to fill the gap between the two. You could also scribe in a panel line onto the side parts to suggest where the rear door is.

Got a fair bit of work ahead of you. Be good to see how it turns out

Its comin along. Keep us posted on the progress. You've got my interest.

interesting project. I'm sticking on it. :icon16: