Need Help With B18 Swap!
Twyztidmind
04-28-2005, 10:11 PM
Today i got my engine in (B18 LS), and on the tranny there is some kind of pump with 2 hoses coming out of it by the speed sensor. We looked on my friends integra and the 2 lines go to the brake master cylinder.
Do they need to be hooked up? If so how am i going to do it?
HELP ME PLEASE!!!
Do they need to be hooked up? If so how am i going to do it?
HELP ME PLEASE!!!
travagliante
04-28-2005, 10:48 PM
They actually go to power steering, just cap them off or loop the hoses together (you will need a enlarger, one hose needs a 1/4in fitting while the other is a 1/2 in fitting)
IMO just put some JBweld in the hole and plug it with a screw. I did it and have 5,000+ successful miles on it!
IMO just put some JBweld in the hole and plug it with a screw. I did it and have 5,000+ successful miles on it!
anthony90si
04-29-2005, 01:39 AM
They actually go to power steering, just cap them off or loop the hoses together (you will need a enlarger, one hose needs a 1/4in fitting while the other is a 1/2 in fitting)
IMO just put some JBweld in the hole and plug it with a screw. I did it and have 5,000+ successful miles on it!
ya i also just pluged them up with bolts. i think it is for when you are at high speeds and makes the steering less responsive..
IMO just put some JBweld in the hole and plug it with a screw. I did it and have 5,000+ successful miles on it!
ya i also just pluged them up with bolts. i think it is for when you are at high speeds and makes the steering less responsive..
Automotive Network, Inc., Copyright ©2025