help!!!! what do i do first!!!!
naked92integra
04-25-2005, 01:17 PM
hey i am very new to hondas, am much more familiar with german rides, so i don't really know where to start or what part sites are ligit and what not...
i have a 92 integra, bright red (soon to recieve a pretty sweet paint job, still red, but multiple clear coats, make my baby shine), it is stock, like pretty much bare, next step is brakes and wheels and tires....
i am a college student on a somewhat limited budget, i don't want uber mods or anything, but i want to swap over to disc brakes all the way around, any suggestions?????
also please post any sites that will be of help, i am the ultimate newbie !!!!!!! :uhoh:
i have a 92 integra, bright red (soon to recieve a pretty sweet paint job, still red, but multiple clear coats, make my baby shine), it is stock, like pretty much bare, next step is brakes and wheels and tires....
i am a college student on a somewhat limited budget, i don't want uber mods or anything, but i want to swap over to disc brakes all the way around, any suggestions?????
also please post any sites that will be of help, i am the ultimate newbie !!!!!!! :uhoh:
knorwj
04-25-2005, 02:17 PM
i was under the assumption that all tegs were 4 wheel disc brakes stock. No need to switch over to it.
K2sInteg98
04-25-2005, 03:04 PM
yea i think all integras come with all disc brakes from my knowledge. Also if you dont know what you want to do first, i would search this forum. Its amazing how much info there is already and im sure you can find a lot of answers to your problems from past threads
naked92integra
04-26-2005, 11:57 AM
i haven't pulled wheels off, but i took a look last night and sure enough...yeah, i felt stupid, lol, i was used to pads and roters, told you i am new to this
naked92integra
04-26-2005, 11:58 AM
then how about an upgrade suggestion while we are on the subject....
what brands do you recommend because i know my brakes are needing to be replaced soon...
what brands do you recommend because i know my brakes are needing to be replaced soon...
Ace$nyper
04-26-2005, 12:21 PM
brembo blanks and hawk HPS pads can't beat them
good metal lines and running a better fuild is also all nice to do at same time.
good metal lines and running a better fuild is also all nice to do at same time.
naked92integra
04-27-2005, 11:13 AM
hey right on, thanks, i checked em out at an autopartswarehouse.com? not too expensive, so when i do brakes, i'll go with those
thanks again
thanks again
Automotive Network, Inc., Copyright ©2026
