97 Blazer CODE P0507
mushhhy
04-25-2005, 08:43 AM
I need help finding the cause of OBD code P0507 Idle RPM higher than expected. I have replaced the Idle Control Valve and do not get the message on the highway only on short trips. I have also replaced some of the convient vacum lines. The vehicle seems to idle a bit high. can any of you more experienced than I help me with this
Thanks
Thanks
BlazerLT
04-25-2005, 01:30 PM
Check for a vacuum leak causing the higher idle.
mushhhy
04-26-2005, 05:55 AM
I will check for vacum leaks today. I changed the Throttle Control Sensor yesterday it seemed that the throttle washigh when stopping I am going to drive it today to see if that helped.
Thanks I will let you know how it worked
Thanks I will let you know how it worked
ricksza
04-26-2005, 06:59 AM
Besides the vacuum hoses, also check for a leak at the upper plenium gasket. Make sure the the hose going to the air inlet duct behind the throttle body is connected.
mushhhy
04-26-2005, 02:33 PM
Iwill look into the plenium an dget back thank you
Automotive Network, Inc., Copyright ©2026
