How To: chrome

i have found a way on how to authenticly chrome objects and it is not chrome paint!
this stuff is called bare-metal and i found it at my local hobby town usa for $6 what it is is that its a foil with tape on the back. so it is really thin and shiny
http://i2.photobucket.com/albums/y7/nosliw2004/Nathansandisc1029.jpg

http://i2.photobucket.com/albums/y7/nosliw2004/Nathansandisc1031.jpg

what i did was take a stock range rover and add some chrome accents to it so first i did some measurments of the vent i wanted to chrome and cut out a piece
http://i2.photobucket.com/albums/y7/nosliw2004/Nathansandisc1034.jpg

then i peeled off the paper from the back of the foil and attached it to the vehicle
http://i2.photobucket.com/albums/y7/nosliw2004/Nathansandisc1037.jpg
i worked from one corner to the other and pushed out the creases i used and exacto knife to cut out the excess.
http://i2.photobucket.com/albums/y7/nosliw2004/Nathansandisc1038.jpg

i also did the grill:
http://i2.photobucket.com/albums/y7/nosliw2004/Nathansandisc1041.jpg
i have also done a hummer h2 ml55 and some other cars ill post pics soon

Pictures are kinda blurry but they all look smooth and neat. Nice!

more of my rover:
door handels
http://i2.photobucket.com/albums/y7/nosliw2004/rangeroverh2010.jpg

hood vent
http://i2.photobucket.com/albums/y7/nosliw2004/rangeroverh2008.jpg

notice the interior pedals
http://i2.photobucket.com/albums/y7/nosliw2004/rangeroverh2008.jpg

notice buttons ontop of the ac vents
http://i2.photobucket.com/albums/y7/nosliw2004/rangeroverh2014.jpg

h2:
custom chrome gas cap from stock maisto h2
http://i2.photobucket.com/albums/y7/nosliw2004/rangeroverh2027.jpg

pedals:
http://i2.photobucket.com/albums/y7/nosliw2004/rangeroverh2023.jpg

doorhandels:
http://i2.photobucket.com/albums/y7/nosliw2004/rangeroverh2006.jpg

hood vent:
http://i2.photobucket.com/albums/y7/nosliw2004/979fbffb.jpg

side vent:

Dude. Please learn how to take clear pics. Nice tut otherwise though.

If it's a digi cam, it's most likely to have a half shutter option where it allows the cam to focus and then it beeps once it's rready.

Otherwise, looks like cool stuff. It sounds and in some ways looks good for flat and plain areas like you did, but would be harder to do on things such as rims.

Gees...You guys need to stop by the modeling section once and a while for tips. Old, old stuff, but yes, affective.

its easy 2 do stuff such as grilles vents doorhandels and small stuff like that but it is a challenge 2 do rims there are some crinckles in the foil but ill try 2 post pics as soon as i can

looks cool