Im Doing My Swap Today!! Have A Few ?'s

Ok i need to get my swap done today. I have a 89 Civic DX hatchback.

I have everything now.

94 Integra engine, ecu, harness, dist, 02 sensor
OBD-0 to OBD-1 Conversion Harness
Stage 3 Clutch
Cable Tranny
SI Injector harness

I have a question about the MPFI Swap. A guy told me i dont need the resister box because you dont need them for the OBD1 injectors so how do i wire the injecters up??

PLEASE HELP!!

The injector wires go directly to the ECU. To make it a little clearer the neg of each injector goes to the ecu and the postive goes to the relay that turns on with your ignition. Thats as easy as I can explain it. Hopefully that helped

ok, do you have a diagram or anything so i know what wire goes were? Do i use the civic SI injecter plugs or the Integra injecter plugs?

what happend to www.fourthgenhatch.com ??? the had the best write up on the mpfi conversion.

you have to move some wires around at the ecu plug ...ill see if i can get it up here.

i can email you the file pm me with your email and ill send it to you.