Clutch pedal very easy to push

i just had the trans and clutch replaced. and now it is very easy to push to the floor..but is will ingage and disingage about 3 inch after i start to push on the pedal i know this is not right how do i ajust this so it will start to engage about 12to20% off the floor?

Do u mean that when u step on it, it just falls onto the floor very easy without wanting to be pushed? Clutch petals are suppose to be stiff (not too stiff) but stiff enough. I think its normal to have it disingage at 1/2 to an inch after u start to push the petal. Make sure they bleed the clutch right.

No it does not fall to floor but is easier than before i had it changed..i change to a cluchmaster dual frition clutch from a oem.. now there is less effort to push on it and it engages and disengages in a very small range. ..went i step on the clutch it start to disenage and if fully disengaged by half why..

the OEM start when i push on it and didnt fully disengage intill it got about 75% to the floor..

is this normal? can i ajust it any?

ty