Head bolt torque.
c150L
04-22-2005, 06:01 PM
Ready to start putting my 2.0 zetec engine back together. Could really use torque specs on head bolts, cam bearing bolts, intake and exhaust bolts.
Thanks,
Dale
Thanks,
Dale
beyondloadedSE
04-24-2005, 11:54 PM
Cylinder head retaining bolts
1. Tighten all bolts to 20-30 Nm (15-22 lbft)
2. Tighten all bolts to 40-50 Nm (30-37 lbft)
3. Rotate all bolts 90-120 degrees
Camshaft journal bolts
13 Nm (115 lb-in)
Intake manifold bolts/nuts
16-20 Nm (12-15 lbft)
Exhaust Manifold Nuts
14-17 Nm (13-16 lbft)
Anything else, just ask. Ive got it all. Btw, you may want to invest into a service manual. :naughty:
1. Tighten all bolts to 20-30 Nm (15-22 lbft)
2. Tighten all bolts to 40-50 Nm (30-37 lbft)
3. Rotate all bolts 90-120 degrees
Camshaft journal bolts
13 Nm (115 lb-in)
Intake manifold bolts/nuts
16-20 Nm (12-15 lbft)
Exhaust Manifold Nuts
14-17 Nm (13-16 lbft)
Anything else, just ask. Ive got it all. Btw, you may want to invest into a service manual. :naughty:
Automotive Network, Inc., Copyright ©2025