STOCK intercooler piping...

The piping connector from my intake to my turbo is trash...and it's like...not staying on straight so the airflow sucks....does ANYONE have their stock intercoller piping I could have...I just need like 5 inches of it..it that.. I will pay for shipping...I just need some piping..and i figured all you guys have front mounts that you have your old piping..lemme know

You could make a hard pipe for like 12 bux and cut your accordian intake some and put the hardpipe in and use a napa hose to put attach it to the turbo.... This is what I did, its damn cheap and easy to do. Make sure you don't cut too much off the accordian, remember you can always take more off but cant put it back on so do some trial and error fits.
Sound way cooler too

I don't know how to make my own hardpipe....you mean to exchange the stock IC piping from the throttle body to intercooler? You gotta bend it and shit.. how

dude get an ebay intake, and just use the hard pipe, it will come with the rubber gaskits to seal it.

What are you trying to do? Do you have an aftermarket intake, and the coupler is bad? Or you are replacing your stock intake with stock flex IC piping?

Well...both...my coupling is shit...it's like bending and pinching airflow...but I AM also trying to get new piping..but that's not what the thread was for...

The coupler..that's it..it's poop..cause yes I do have an aftermarket intake

Use a rubber coupler from home depot. You don't really want to use a flex hose, but I suppose it could be done.

i thought that would melt