97 MC Z34 Turning Clunk

Maybe someone could help me out? I Have Clunk sound when I Turn my wheel. the steering shaft problem was addressed some time ago by a recall. took it to the shop and they found nothing but heard it. I did put on a new wheel hub which they say is most likely the problem. anyone have any ideas?

it's probably the bearing plate at the top of the strut tower. Not a huge deal, but if/when you replace the struts in the front - replace those too. If it's a clunk when you're moving and turning - could be a CV shaft.

Check your ball joints the will also make a clunking sound when your turn our at least mine did.

Check your ball joints the will also make a clunking sound when your turn our at least mine did.


Should have mention I replaced both ball joints and right wheel hub assembly. could it be the CV Shaft? the whole assembly (old) fell right out when I took the 4 hub bolts off. I pushed it back up and in with new hub.

Check your CV shafts. have you replaced our checked you tie rod ends as well?