gettin low....

Hi guys...im new to mods, but first on the list is to lower my car...but how low can i go yet staying safe...inchwise...from ground level to bottom of the car...15 inch rims

I would say eather get coilovers and go as low as you want, or get a good 2' drop spring like Skunk2. One thing you have to think about is that most springs will sag and give you a lower drop then they say, but 2' should be fine. Get some good struts before you even get your springs. This way you will not be to tempted to put them on your stock struts. And take it from me you don't wanna have to do the job twice. If you put them on stock struts you will blow them out and then have to take the springs off again to put them on new struts. The struts you should get are aftermarket, KYB, Koni. You can find them on any import web site. Good luck, and don't forget do things right the first time.

look on ebay...they have good deals on spring/shock or sleeved coilover/ shock sets
just an example http://search.ebay.com/91-civic-shocks-springs_W0QQsofocusZbsQQsbrftogZ1QQfromZR10QQsacat Z-1QQcatrefZC6QQsargnZ-1QQsaslcZ2QQsadisZ200QQfposZQ5AIPQ2FPostalQQga1024 4Z10425QQftrtZ1QQftrvZ1QQfsopZ1QQfsooZ1QQcoactionZ compareQQcopagenumZ1QQcoentrypageZsearch

make sure you do it right the 1st time

and for the love of god. DONT HEAT YOUR SPRINGS in the same manner dont cut them either. its just a cheap way for people to make money.

Make money$ ? umm, sorry but how do you make $ cutting your springs?
Now maybe save money, but not in a good way. You will look like you have switches ^^^^^^^